Avrocar easy print

Easy to print Avrocar. This is mix of prototypes, plan drawings, and idealized versions. The real Avrocar was not even remotely useful, but I’ve kitted this one out with a bunch of options: cargo racks, hardpoints, and m40 recoilless rifles, use as much or as little as you like, and the “cockpit” sections are interchangeable

Image is of models printed in 1/52, with 3dbreed figure for scale.

The standard files are designed to print AS-IS on filament, no additional supports required.

The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Mirror the resin cockpits and M40 for the right side pieces.

Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.