T92 prototype easy print

Easy to print T92 prototype. Some details have been changed for looks/ printability.

Prototype “light” replacement for the walker bulldog. The main gun should have the cloth around it, but I’m terrible at that, so you get the bare gun, and can add the cloth if you want to flex your hobby muscles.

The Left turret is a 30 and the Right a 50 cal, you can mirror if you want two 50s or two 30s (they are otherwise identical).

I made a completely fictitious command/ recon turret without the main gun for those of you that want something alt history, or a base for an MLRS or other weapon system mounted on top.

Image is of models printed in 1/52 with 3dbreed figure for scale.

The standard files are designed to print AS-IS on filament, no additional supports required.

The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.

Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.