398 thoughts on “Vendor Dashboard

  1. redmist1122 says:

    Always enjoy your work and never had any issues printing. If so, you were very fast to correct. Again great stuff – my go-to WWII models.

  2. Lucas Perdue says:

    Studio Grozny creates excellent minis, the files print well right off the bat, and the detail is incredible.

  3. neal_ab says:

    I always find this designers figures to be of the best quality. Printing his figures is a real joy. The detail is incredible and the realism of the figures towards their intended role is high. I initially bought his models to provide gun crew for the various artillery guns that I 3D print, now I tend to buy anything he develops and enjoy making his models available as Gardenshedprinting.com

  4. neal_ab says:

    I always find this designers figures to be of the best quality. Printing his figures is a real joy. The detail is incredible and the realism of the figures towards their intended role is high. I initially bought his models to provide gun crew for the various artillery guns that I 3D print, now I tend to buy anything he develops and enjoy making his models available as Gardenshedprinting.com

  5. Jeremy Mastran says:

    I’ve printed a few of these models so far and the detail is awesome! Rich in durable detail but enough space for me to add my own bits and baubles. Keep on, keepin’ on!

  6. ag.chambers says:

    Have purchased ad printed some French, absolutely amazing crisp and precise , bases are a added extra , will be buying more…..Ade

  7. horus67_1999 says:

    A brilliant range of 28mm Napoleonic miniatures now rivaling many metal and all plastic ranges. extensive Russian(almost complete) French, Austrian ranges. With the addition of Russian or french hussars and French chasseurs Duchy of warsaw is all but complete..Bavarians almost complete…Marco brings out new sets every week. Absolutely fantastic files for printing. I got a 95+ success rate printing on my elegoos. stack em up on chiti free select all tilt them back 7%(trust me it makes the bases flat at bottom) and hit auto supports. slice save and print. a mars will print 24 to 28 at a time. a saturn twice that.

  8. scotthdriver321 says:

    I am new to 3D printing, but thus far Deweycatproductions has been, by far, the most consistently well designed and with sensible layouts for efficient printing, etc. Also, he gives away so many good files for us hardcore 28mm wargamers…Awesome Stuff! Thanks again, Scott

  9. Dirk Eichelberg says:

    Thanks for the Prussians. I was desperately waiting for them. Hopefully Landwehr and Reserves will follow soon.

  10. wbanders says:

    They guy makes great products, and has a wide selection. He even offers many creations for free, which is damn generous.

  11. John McManis says:

    Great models! I love the option for separate interiors on the open half-tracks. It would be helpful if more pieces came with pre-supported options.

    • Matthew Webb says:

      Hi John, thank you for your kind words – I think the feedback for the halftrack might be for another purchase though 🙂

  12. richardsjacob27 says:

    Propylene’s work is amazing and top notch. The sculpting and quality of the models he puts out are second to none. He is easily my “go-to” for 28mm figures.

  13. Emre Pak says:

    I am satisfied with model. Just suggesting vendor; You can put .stl files in pack. Most of us buying them for 3d print 🙂

  14. Emre Pak says:

    I am happy with model. More than this i am happy to know Henry. Gentle and helpful person. I will continue purchasing.

  15. gxmarshall says:

    I have purchased several, mostly Finnish. STL’s files done by JSM and have to say they have all been exceptional. Look forward to more.

  16. Emre Pak says:

    Henry is really professional about historical war/scenery models-miniatures. I am purchasing one by one what i need. And i am very happy with every result. Using resin printer and getting every detail without any loss.

  17. Bruce Rehm says:

    These are great models. Very sturdy, I use them in High School history classes during our Civil War unit. The students love the interaction.

  18. andersonbeames says:

    Looks amazing, should print excellently too, will flesh out the rest of my SAS army’s jeeps perfectly.

  19. scotthdriver321 says:

    Deweycat Productions is top-notch! Great Designs by a Great Person! Thank you Again! A+++++ -Scott from TableTopGaming

  20. Andras Libal says:

    Hello I love the halftrack + the crew (US Half track with crew – 28mm × 1), but I was very sad that the gunner is not available separately … he would make such a good addition to other trucks I have printed. Is there any way to get the gunner and the driver separately just like the crew? Thanks.

  21. MARK Pashley says:

    I can’t give a review because the file wouldn’t open, and my computer and printer didn’t recognise it.

    • fonkraus25 says:

      Hello Mark, I`m the creator of a model you have problems with, I`m very sorry for this incident, if you have problems with unzipping file with model parts I can send them to you directly, without an archive so you can print them, however, I checked the archive with my WinRAR, and it was fine, and like 10+ people already bought the file and I received no complaints, so it’s a bit strange. Sorry for the trouble, Vlad

    • Jonathan Cox says:

      Hi Gary,

      It looks like the files were in the process of being uploaded when the purchase was made. You should now have access to all files associated with the order. If you have any other issues, please feel free to contact us directly.

      Kind Regards,
      Jon

    • hartolia-miniatures.fr says:

      Hello, Sorry for the inconvenience, it’s now solved and you can download it. Have a great day. Kind regards,

    • hartolia-miniatures.fr says:

      Hello, Sorry for the inconvenience, it’s now solved and you can download it. Have a great day. Kind regards,

  22. geicca says:

    grenadiers and elites are there, simply you don’t see them. There is only small diferences in Dutch uniforms

  23. geicca says:

    grenadiers and elites are there, simply you don’t see them. There is only small diferences in Dutch uniforms

  24. clayton King says:

    I love the Axis And Allies pieces he’s made. They are a great addition to the game and help me fill in the ranks. I hope he does a WW1 addition because everyone needs more infantry for that version

  25. Paul Summerhayes says:

    These are some of the finest printable models on the market. Night Sky Miniatures is highly recommended.

  26. neal_ab says:

    An excellent model made even better by the reworking for printing in resin as well as plastic. Designed for ease and reliability of printing I find this designers work excellent.

  27. Алексей Андронов says:

    I was looking for bits for Chinese WW2 soldiers in 1/56 for years. And this studio did brilliant things for this rare theme.

  28. mark akehurst says:

    I have now used a good few files from Eskice Miniature, and every one has been superb, love the style, love the details and love the way they come out. The first seller I search when looking for new stuff to add to my German Army.

  29. ikaar2013 says:

    Thank you, I love this model it is very detailed and reasonably priced. You made me happy. I discovered the story of the USS Stewart dd-224 captured by the Japanese (pb-102) and I wanted to have it in axis and allies war at sea game. As i’m crazy I printed it in TPU and colored with acrylic. Don’t listen to the Internet … TPU can be colored 🙂 and now no more broken antennas. tThanks again for your work.

  30. James Dombrowski says:

    Can’t find where to edit my review but please ignore previous review. Author contacted me and fixed the file. Model work is amazing.

  31. krisjohnson72 says:

    I’m very happy that I purchased this model. It printed perfectly and was just what my army needed. Thanks!

  32. Gordon Landefeld says:

    The models were wonderful, and full of life. Adding my own supports was a challenge but just for me haha. Will definitely buy more!

  33. Mathieu Tyras says:

    Awesome models, very detailed and very reactive designer ! Can’t recommend hard enough

  34. Sander Noordzij says:

    Bought the French heavy support group, needed a medium machine gun team. Although the crew members are nice, the machine gun itself is badly done. As in, it has no detail. The barrel is a plain hexagonal cylinder for example. Looks like the rough shape of the MG was designed and then it was left at that…

  35. Lyric Liu says:

    Your 2S6 Tunguska is great.But you forgot to add the independent components of the missile launcher in the model,could you add it to the download list?

    • Kallum Ward says:

      Redownload the file and you’re golden, I realized shortly after upload and fixed the file.

  36. Andy Watkins says:

    I have bought a number of the WW2 warships, Japanese and American. I originally printed them on an ender 5 pro FDM printer which did surprisingly good, and now reprinted on an Elegoo Saturn S Resin printer which are even better. I highly recomend the models and can confirm that whilst Resin is best, a good FDM printer can do a pretty good job.

  37. Per Åström says:

    Very good figures! Sturdy and simple but still with all the important details which makes then easy and fast to paint. They are sturdy and really well adapted for actual gaming. They also print amazingly well, with almost no failures for me so far. I will also soon move from 28mm to the epic sized ones too, the offered test print ended up looking great.

  38. adolfolaurenti says:

    Chris has been extremely supportive and helpful in assisting me in my first foray into 3D models. Highly recommended!

  39. Sacha Elschner says:

    The Epic Prussian reserve Infantry: very nice detail in this scale, only historical inaccurracy , the NCo had no Gaiters , they had boots like the officers. But this is minor so 5 stars:)

  40. Dimitrios Monette says:

    Bought the Napoleon and Murat set, the grenadier is entirely hollow and cannot be repaired. Models are nice but unusable for me.

  41. fatruff3 says:

    Great models and with patron 30% off great price for the models you get and the quality.

  42. Patrick Bellmann says:

    I bought both King Tiger upgrade kits but there were no files to download. I didn’t get any files for my money.

    • Jonathan Cox says:

      Hi Patrick,

      I’m sorry for the trouble here. I’ve reached out to the creator and this should be resolved. Please let us know if you have any other issues!

      Kind Regards,
      Jon

  43. Frank Kreuzer says:

    I Print his work in 28mm and they really are some of the nicest Models , mostly better than buyable Resin Versions of the same vehicles. Keep your good Work Up😁

  44. thomasrobert.stock says:

    The models are fantastic, I print them in 1:2400 for my purposes and they have been an amazing help with expanding my fleet!

  45. Wiktor Chwiałkowski says:

    bought an Luchs, model is superb, comander in cupola or not option and additional stuff was great addition, highli reccomending

  46. Clifford Ells says:

    Similar issue to a previous customer. Purchased the file “Ruins of destroyed medieval house with thatched roof (9) × 1” but I’m not able to download. Thanks

    • hartolia-miniatures.fr says:

      Hello, Sorry for the inconvenience. The file has been re-uploaded : you can download it now. Have a great day. Best regards, Adrien

  47. Clifford Ells says:

    I have the file. I purchased it directly from the company and was again unable to access the download. I contacted the company and they sorted out the issue in a hour or so. Subsequently I can now access the download on the Wargaming 3D site as well. After all that, the file is very good and exactly what I was looking for, I just wish it had been an easier process.

  48. Jan Jasinski says:

    Great contact, Eugene sent me files very quickly by email after I had problem with downloading my order. Superb models, also proven to scale very good, down to 20mm/1:72 , printing in smaller scale with no errors and minimal number of supports. I recommend.

  49. jerzy.ryman says:

    Tried British Mortar with crew and British heads. Very nice so far, All supports are great, except maybe for really tight one on mortar itself – once it printed I was sure I break this, but fortunately was able to separate supports without damage. Overall waiting for more interesting figures (officers?).

    • txifis says:

      Thank you very much for your review, we do a lot of printing tests to check that the supports work well. The officers pack is a very good idea for future models, we are working to complete the armies we already have, but we are a very small studio and we cannot spend as much time as we would like to design our models.

  50. John Sulek says:

    For some reason, there was no file to download but the file was paid for. Please review and let me know.

  51. Jens Bothur says:

    Love your models. Perfect for 1:8000 WW2 wargaming. I used an Anycubi Photon Mono and the results are superb. Prices are good and the aircraft even for free (mostly). Would love some Nells and Claudes for the Japanese next 😉

  52. kevin spiller says:

    I have purchased lots of the MC sets over the last year and find the figures are absolutely superb. I tend to print more than I can ever paint but have upscaled the 15mm Epic figures to 28mm and have sets of perfectly detailed figures very easy to paint. Marco is very easy to deal with as well . All round great figures great designer.

  53. Jeremy Adenstedt says:

    love the ToonKrieg lineup cant wait to start printing my Germans. cant wait for the other units. thanx

    • zirrian says:

      Dear Pepe G, I have uploaded the files, I have made a mistake in attaching the file to the store item. Please check if you are able to download them now. Thank you very much for your purchase, and I apologize for the inconvenience.

  54. piperlssah says:

    I’ve printed so many of these figures, they are amazing, they capture the movement, flare and intensity of battle, I’m slowly replacing all of my warlord plastic figures…………Thank you so so much for your work

  55. vortigernrex says:

    Nice Spanish Cavalry models, but no horses? Going to be a mission to find horses that fit the models nicely.

  56. Andrew Ellerby says:

    Hi , Thanks for designing the model , planning to use it for my early WW2 Romanians as they still had a two in use. Printed it on my Anycubic Vyper FDM printer , good result but where the axel fits into the wheel needs improving. Thanks Andrew

    • esmichnik says:

      Thanks. Very interesting see results 🙂 model make for LCD resin printers. Newer see how it print on fdm

  57. kenneth eldridge says:

    Very happy with them the Prints are great 95% print scale good to match other well-known manufactures.

  58. Dan Cyr says:

    Very nice for their scale. Would be nice if everything had been included in one download though (smile). I’ll be back for the Dutch fleet.

  59. Denis Wade says:

    the supported files are poorly supported, angles are pretty much 80-90* straight off the bed, and they surprisingly failed to print. The unsupported models are 1.5mm scale, instead of 15mm (well at least i hope that is the scale, they are tiny and had to be scaled up, so we will see if they all match up. For what this is and what it is used for it would have been so much better and easier to just combine them all into a single file, with maybe the pintle weapons separately, at the scale i can see no use case that requires these to be multipart. a lot of fiddling around, hopefully i can get them to print, not super impressed so far

  60. christopher chaplin says:

    They are great models. The scaling is very good and matches well with most other leading brands mins, I would buy from them again.

  61. richardsjacob27 says:

    The figures that Propylene puts out are second to none. It’s always a pleasure to pick up his latest work.

    • just.some.miniatures says:

      You backed only main pledge – vehicles – not the addon with infantry multiparts. The system on this page always warns if the coupon is not assigned to a specific buyer. Why, despite the warning, did you decide to buy a product that you did not support on KS and still complain that you had to pay for it?

    • Nyxyx says:

      Hello Cameron, The Merkava files had some issues related to errors within the website, but I have fixed this issue. Feel free to redownload the files. Sincerely, NYX

    • Nyxyx says:

      Hello Cameron, I have been in contact with the site runners, we believe this issue should be solved now. Thank you for your patience.

  62. briansmith446 says:

    I have been printing 1/1800 ww1/ww2 ships for a number of years now. I downloaded the freebie files from this site and printed them out and was so impressed by their quality that I bought all the models available. I am looking forward to seeing more of this excellent range of vessels added to this site. Buy them, you wont be disappointed. Brian

  63. jaimemolina_sp says:

    Two thumbs up! These are fantastic miniatures. What I appreciate most is that the anatomy and the historical detail are perfect. I am a modeller and wargamer, and the convenience of Eugene’s figures to quickly put together a unit or elements for a diorama are unsurpassed. Great models.

  64. Edward Warden says:

    Printed loads of Ghukek’s WW2 Royal Navy ships and planes without issue and surprising detail from my Ender 3 V2 – recommended!

  65. Anton Ahmetaj says:

    For the scale this is literally the most detailed thing I have ever come across. Like seriously, you could scale this up to 1/35 and it would STILL look good. Seriously recommend. (although I would give it a minute to load your files as they are quite large XD)

  66. Ben Fiene says:

    Exceptional quality vehicles. I’ve printed a few of the Sherman and Cromwell types in 1/72 and they are brilliant. Hoping he can do an M4A2 to finish off the Sherman variants.

  67. AH 3d Hobby says:

    Backed one of their Kick Starters and was not disappointed. The detail of the miniatures are great and beyond some of the other designers I have backed and purchase from. The scale of the miniatures fit nicely in nicely with other ones I have already.

  68. Blake Ayling says:

    T-38 printed in 1/72 worked very well; Looks good along side scale models. Kit supports worked well. From download to complete vehicle in 8 hours.

  69. Graham Riddle says:

    Great work as usual. I like that you can pick the modules to use – in particular the scenario generator.

  70. Michel Casteleyn says:

    Excellent quality! Please continue to bring us more excellent models. Best regards, Michel

  71. savvyprint says:

    I doubt this model has been test printed, the detail is way to thin even at 1/56 to print reliably, also the model has no scale and was enlarged by 3470% to look like it was something close to 1/56 🙁

    • hartolia-miniatures.fr says:

      Hello, The model you bought is provided in 1:72. To print it in 1:56, you just need to upscale it to 129% (72/56) in your slicer. You can contact us directly if you need any assistance.

  72. Brad Golding says:

    Tovarish Lenin downloaded okay, but the files wouldn’t extract. Sorry, but when things don’t work figuring out why is way above my pay grade. Being old doesn’t help to understand this stuff either. What do you suggest? My complex needs a Lenin statue! Cheers

    • Nyxyx says:

      Hi Brad, I have reuploaded the file with a different compression method. It should open properly now, give it a test. Sincerely, NYX Files

  73. Russell Malham says:

    this was a great site to find lost of 3D files for sale some free this Model was hard to find but found on this site

  74. Gary Hewitt says:

    Downloaded most of the U.S. and German sdl’s, printed and painted them, only two words to describe Garths work F**king Brilliant (Awesome for you yanks lol) Thanks

  75. brendonjsoutham says:

    Lovely models of the Mk VI and Humber Armoured Cars. Scaled very nicely to 1:72 and printed perfectly after adding supports to the unsupported versions. If you are open to suggestions I’d love to see an early M4A1 for North Africa, with cast hull and the early suspension with the return roller above the bogies.

  76. kevinblakeh says:

    amazing figures, the sculpting is very good and the proportions are very suitable, just as I was looking for, I don’t like the traditional animated anatomy of wargaming

  77. drk232 says:

    New to printing and everything I’ve purchased from deweycat has been great!! Keep up the great prints

  78. Jacob MacGregor says:

    Great file for the Su-25. I would ask after printing could make a version that has no internal geometry? that caused half of the canopy to fail to print I did not notice this until reviewing the sliced file for issues after the print and the cockpit and a couple of other areas are defined in the body of the aircraft. The ordinance is great! I would fix it myself but my blender skills are lacking at the moment.

  79. speedywin3d says:

    The infantry are easy to print and versatile enough to fill out a squad. My Italian, early war Balkans Theatre, army is on its way to the tabletop. Chris was quick to respond to a question and very helpful.

  80. tune7585 says:

    I’ve discovered MC Miniatures – mainly focussing on the epic size Napoleonic figures and have been extremely happy with the quality of the prints I’ve been getting. Keep up the good work. Are you planning to release artillery and limbers for the French, it would be a nice addition to the line. Once I’m happy with the French, I plan to either work on Prussia or Warsaw.

  81. Lorraine Hathaway says:

    These are the Gold Standard for 28mm prints. The fit of tracks and turrets leave anything else I’ve printed in the dust. Absolutely superb, and I will now be purchasing the entire range, without hesitation. I have also printed them at 1/72 with equally fine results.

  82. Przemek Szwed says:

    Got a T34….i just gotta say im not an expert in 3d print….but thx to NSM….well, its just download the file, put in on pendrive and print…simple as that!!! THX YOU GUYS!! Love the files!! 🙂

  83. Adrian Pickard says:

    Looking forward to trying these Epic French Generals before I opt to purchase more. They certainly look good on the site, hoping they print up as well.

  84. Richard Lane says:

    Really nice detail on the howitzer. Recommended. Printed well, even on my basic Elegoo Mars.

  85. mitchelltchan says:

    Aquila’s 28mm miniatures are some of the best i’ve purchased. His latest Russian and Ukrainian forces, including his vehicles, fit in perfectly with existing creators’ models on the table. The sculpts are detailed and the variation of poses are very realistic. I highly recommend Aquila’s models for your modern wargaming needs!

    • AQUILA miniatures says:

      Thank you! We’re happy to try! We will continue to delight you with our work.

    • AQUILA miniatures says:

      Thank you! We’re happy to try! We will continue to delight you with our work.

  86. Matthew Webb says:

    Hi Markian. As written in the description, it is intended to be used with the US Infantry plastic models, whose proportions are bigger than that of the USMC plastic models. I have printed several of these for my own US Infantry models are they fit perfectly. I would appreciate a message if you’re struggling so that I can help, rather than leaving a bad review based on an application it wasn’t designed for.

  87. kasey koehlein says:

    lots of extra little bits to fill the base. plus the only 80’s era us soldiers I can find.

  88. dan3dprintgdynia says:

    “PL” Świetny model ! Dwa warianty do wyboru, wszystko dobrze się drukuje. Serdecznie polecam! “ENG” Great model! Two variants to choose from, everything prints well. I heartily recommend! “FR” Grand modèle! Deux variantes au choix, tout s’imprime bien. je recommande chaleureusement

  89. dan3dprintgdynia says:

    Another model, another satisfaction! Supported versions are a beautiful thing. I can’t wait for more models.

  90. dan3dprintgdynia says:

    Great model flakpanzer IV, test printing without any problems. super details, cool stuff 🙂

  91. Serge Cavin says:

    Bonjour, J’ai testé plusieurs fichiers venant d’Arvernes Miniatures (Sherman Calliope, SDKFZ222/223, Panzer III, Bishop) et ils sont tous incroyables. Le détail est tel que je dois confirmer l’ouverture de certains fichiers car il sont lourds. XD Joli boulot ! Je me réjouis de voir la suite de ses créations.

  92. vogless says:

    Just downloaded the Kubelwagen model. OUT-STAND-ING model!!!!! No issues, looks great. NICE job!

  93. John McManis says:

    I purchased the 1:100 scale M370 Chaparral. As an accurate 3D model of the vehicle, it is very good, 5 Stars! As a model to be printed out and used for gaming, it would be 0 Stars. The creator has made the parts accurate to scale but failed to factor in how that means many components would be paper thin and too fragile to be handled. Examples from the M370 are the track skirts and separate rear cargo gate being entirely to fragile. The vanes on the missile are so thin as to make the missiles entirely unusable. This is the reason why creators need to add some “chonk” to small scale models. The “sled” in the bed of the carrier body simply did not have to be a separate piece and could have been modeled as one piece. In addition: the pieces are made to be an extremely precise fit. There needs to be a bit of a gap to allow parts to fit together well due to how the resin can expand just a bit while curing, and the fit here is so precise that the printed pieces will not slot together without sanding the prints or modifying the files beforehand.

  94. submersiblefox-2172 says:

    Every model I’ve gotten from Ghukek has printed fantastic, the perfect blend of detail and printability.

  95. dan3dprintgdynia says:

    Tiger H1/E1 pack – amazing. Pre-supported files works wery good. Just perfect.

  96. dan3dprintgdynia says:

    Sdkfz 250_1 / 3 / 7 pack – next great stuff. Pre-supported files like always – works perfect.

  97. dan3dprintgdynia says:

    Neubaufahrzeug – great. Im using only pre-supported version. Engineering supports here and in the all Arvernes models.

  98. dan3dprintgdynia says:

    Sdkfz 250_9 and Sdkfz 253 – looks like milion $ 🙂 Like always pre-supported version – 10/10.

  99. dan3dprintgdynia says:

    Panzer II Luchs – 11/10 pre supported version, like always – perfect.

  100. dan3dprintgdynia says:

    Panzer II Luchs – 11/10 pre supported version, like always – perfect.

  101. John McManis says:

    My initial review gave this creator a lower rating as while the 3D model was top tier, it was not suitable for print as a resin model or gaming piece. The creator contacted me and we worked for over a week, making and testing different changes, going beyond the point where other creators would have just said “good enough”, to make it not only a top quality model but also suitable for resin printing and more robust for gaming use. Definitely earned 5 Stars!

  102. ingofm says:

    Hi Magpie Designer, I have just bought 2 files from you….the Scary Fish and the Devil Fish…i.e Stingray and the mechanical fish. When I went to download the files both were showing the same file Stingray.ZIP. So i downloaded two files of the Stingray Craft and not the mechanical fish file. Can u help sort this please. Thanks David ([email protected])

  103. Maptnhc says:

    Very detailed model with quality supports, would recommend! 🙂 As a suggestion, I would do the draining holes a bit bigger for the hollowed parts, since they tend to keep a lot of resin and requires a deeper cleaning than usual to ensure no resin is left inside.

  104. Evan Burr says:

    Excellent and characterful miniatures. The pre-supports work perfectly on my Saturn 2. I cannot recommend these miniatures enough.

  105. MastrFong says:

    Amazing models with great pre-support versions (i.e., always ready-to-print without any hassle).

  106. rehmbrian says:

    Wow, the troop types, vehicle types, and nations continues to expand. Love these miniatures. Growing the Brits and the Germans while my brother is growing his Americans. So much fun to paint!

  107. woodspjb says:

    Excellent figures that print with no issue with auto supports. Scaled to 28mm fit excellently with Perry, Piano games and Rafal Polkowski figures. Only printed and painted 2 battalions so far but I am very happy. Getting the Revolutionary French and Egypt range. A really good find. Many thanks.

    • Yevgen Chernov says:

      Thank You! Very week I put more sets for sale – I hope You will enjoy those that will come.

  108. georgethemmaker says:

    Got Panzer IV Collection! Test print a PzIV F2 at 1/72,hollowed and supported by me with no problems at all! Test 2/ An ausf.H with zimmerit at 1/144!!! You have to see to believe the outstanding detail! Only the jack looks not so good…

  109. Clifford Ells says:

    The What a Cowboy Character Dashboard is brilliant, so much better than drawing hash marks on a piece of paper. The files printed easily on my Prusa Mini and everything fits perfectly. The web app, which produces the paper character sheet that fits under the dashboard is an excellent addition. I can’t recommend this product highly enough, well done!

  110. rchrisboehm says:

    Purchased the Ho-Ha and am extremely pleased with it. artou nailed it. Track sag, tires are superb, attention to detail outstanding, very straightforward and easy to print. Very hard to find this model let alone such a clean, high resolution of it. Strongly suggest downloading.

  111. rchrisboehm says:

    Purchased the Ho-Ha and am extremely pleased with it. artou nailed it. Track sag, tires are superb, attention to detail outstanding, very straightforward and easy to print. Very hard to find this model let alone such a clean, high resolution of it. Strongly suggest downloading.

  112. rchrisboehm says:

    Purchased the Ho-Ha and am extremely pleased with it. artou nailed it. Track sag, tires are superb, attention to detail outstanding, very straightforward and easy to print. Very hard to find this model let alone such a clean, high resolution of it. Strongly suggest downloading.

  113. Alfred J Knipe says:

    Beautiful figures but ruined by no officers, drummers, or standard bearers!! Really??

  114. maxwell_instruments says:

    Terrible model. It’s hollow and it’s all one piece not like it shows in the picture.

  115. al.bigman555030 says:

    Leichter Einheits-Pkw Kfz 1………Amazing! Thanks for a great model. Any chance you could do any of the early Kübelwagens (none VW ) used by the Germans, Wanderer W11 12/60 PS 1935-1941 4,333 Horch 830 R 1934-1937 4,536 Mercedes Benz type 320 WK 1936-1939 1,764 Mercedes Benz 10/50 PS Stuttgart 260 1929-1935 1,500 Adler 3 Gd 1936-1940 4,297 About 10,000 early Kübelwagens based on touring cars were used by the Germans nearly all predating the Volkswagen Kübelwagen!

  116. SEYSSEL Laurent says:

    Topissimo , le monde du france 1940 ne peut pas réver mieux. Le plus c’est le detail des rondaches casque adrian. Proposition de piste a explorer => Chasseur alpin avec beret et casque avec rondache cor de chasse, infanterie coloniale et tirailleurs sénégalais, dragon portés. Merci a vous néanmoins pour ce travail

  117. Kyle Winsett says:

    The Magach 6Bs, M551, Harrier and AH-1S were very easy to piece together and print, the Merkavas and M109s are a bit difficult but manageable. I did have some issues with the Merkavas not going into 3D builder at matching scales. I had to add filler pieces to the Merkavas and Magachs due to the resin I was using, truly hollow models don’t always print well on my Saturn 4K. I would like to have seen an M203 in the US Infantry models but overall very happy with these parts. Would love to see more infantry sets (Team Yankee compatible please) from you NYX, your armor kits are great!

  118. jakub.rozdzestwienski says:

    I bought the Tiger I pack, the files are excellent and detailed, but the supports are unacceptable for a paid file, there are obvious islands left that would result in warps and print errors if attempted in printing.

    • Matthew Devenish says:

      Hi Jakub, sorry to hear you have had an issue with the Tiger 1 pack, I have sent you an email to request additional information so I can resolve the issue for you. Matthew

  119. tim.lamont0 says:

    I bought the 15mm Piedmontese figures. Very nice, however the Elite company figures are just the line company figures (file has the same name) not sure if it’s a fault with the website or the files saved under that link. But I basically paid twice for the same figures. Please check and update your Elite company files. otherwise, nicely designed figures.

    • geicca says:

      It was obviously a fault, I updated the file link. If you have troubles to download it again contact me.

  120. csssamail says:

    I can confirm this prints fine on resin printers (I use the Mars 3) and does scale well. My only critique would be the lack of slate armor on the sides of the ships, but at this scale it’s a pretty minor complaint.

  121. opvtequipment says:

    Aquila’s customized soldiers perfectly meet any needs for Soviet/Russian infantry in the 1980s and 1990s. The details of the infantry are rich and in line with history. Whether it’s regular mechanized infantry or spetsnaz, you can find solutions here. This opportunity to create a unique army cannot be missed by anyone!

  122. Mark Hoyne says:

    The German Cavalry is spot on, the horses are excellent they have a realistic look and print perfectly, the detail is great, same for the riders and all of the modular parts. Quick to reply to enquiries and looking forward to any further cavalry models that might come out. Working on a New Bolt action force with these now. MK

  123. deadkraken says:

    AEC Matador tractor/ 5.5″ Artillery piece/ FCM36 French Infantry Tank. These are great and two of them are rarely seen vehicle miniatures which adds to them and the attention to detail is awesome, very happy with the stls i have, wish there was more to get!. Would recommend.

  124. moulinjacques says:

    Bonjour J’ai acheté le set Napoleonic french fusiliers in shako set 2 dans la facture: Order #264198 was placed on December 3, 2023 and is currently Completed. Cependant quand je veux télécharger le set je reçois ce message: Sorry, you have reached your download limit for this file Go to shop Que dois je faire? Merci

    • Yevgen Chernov says:

      Dear Moulin, You wrote that You can not download the set You bought, because it says: You reached Your limit. In my wargaming3d shop there is a limit of 6 downloads per set You buy. So probably You have downloaded it 6 times already and reached the downloads per purchase You made. Check it in Your downloads folder – they should be there. Remember that I put them in winrar file to pack the files in one. So You will need winrar program to unzip them. Hope this will help You! And we hope You will enjoy the figures! Kind regards, Kozak miniatures

  125. wildcards58th2001 says:

    I love your stl files and subjects. It printed out great. Please make the Autocar COE 5 ton Tractor and trailer and US 105 and 155mm Howitzer Thank you and keep up the great work.

  126. wildcards58th2001 says:

    I love your stl files and subjects. It printed out great. Please make the Autocar COE 5 ton Tractor and trailer and US 105 and 155mm Howitzer Thank you and keep up the great work.

  127. ghstrdr5101 says:

    I downloaded the Grizzly and come to find out the turret is missing from the print. OR I am missing it somewhere.

  128. ghstrdr5101 says:

    I have to revise my review!! Superfast response to my original review and corrected the file here as well as made sure I had a copy of it in the email!! Outstanding service and response!!

  129. ghstrdr5101 says:

    I have to revise my review!! Superfast response to my original review and corrected the file here as well as made sure I had a copy of it in the email!! Outstanding service and response!!

  130. Michael Schuster says:

    Hi, just ordered the -Late War German Holzgas Truck- and again very nice and rar model, but…the ZIP does not include the rear wheels….!? Michael

  131. scott.miquelon says:

    These are great files at a great price. This designer has a good eye for what detail to show for printing at 10mm. I have yet to paint up any of the AWI figures, but have painted up some of his other sculpts and they take paint wonderfully.

  132. scott.miquelon says:

    These are great files at a great price. This designer has a good eye for what detail to show for printing at 10mm. I have yet to paint up any of the AWI figures, but have painted up some of his other sculpts and they take paint wonderfully.

  133. Ivin Catania says:

    First of all I must compliment you about your designs. Finally I have all the officers I need and also command units (standard bearer and musicians) but I wanted to ask you when will you provide some artillery?

  134. Ivin Catania says:

    First of all I must compliment you about your designs. Finally I have all the officers I need and also command units (standard bearer and musicians) but I wanted to ask you when will you provide some artillery?

  135. kr.kimberley says:

    Models look great and I’m looking forward to printing them. I was surprised to see that I could only download them twice and that the download link would expire in 2 days. Most vendors on Wargaming3D offer unlimited downloads with no expiry, which is very helpful in case a HDD crashes and one loses the stl’s one has paid for. If you start to offer this as well I’ll be more likely to buy more of your models.

    • CALAB MINIATURES says:

      Hello. thank you for your purchase If suppose there is an error on download expire time If will check it on my products thank you

    • CALAB MINIATURES says:

      Hello. thank you for your purchase If suppose there is an error on download expire time If will check it on my products thank you

  136. pauls says:

    bought the Dodge T110 truck, a VERY nice model, very well done considering the scale. Thank you for making this rather rare truck available!

  137. joseph.thornhill63 says:

    Great products and even better customer service! I brought up an issue I was facing and it was answered nearly immediately with updated files! I’m about 2/3s of the way done printing out the tropical village combination set! Very nice prints!

  138. tune7585 says:

    These files are among the best Napoleonic STLs I’ve seen. If there’s a down-side, the absence of infantry command figures would have to be right up there. That said, recent kickstarters by the sculptor included these, so I’d expect commands to be available in the not-too-distant future.

    • Stephane Monneraux says:

      Hello and thank you so much for this very kind message, I will continue and your words are very motivating!

    • Stephane Monneraux says:

      Hello and thank you so much for this very kind message, I will continue and your words are very motivating!

  139. Matthew Webb says:

    Nicely detailed models and the infantry are in believeable and interesting poses. I printed the presupported models purely through being lazy and had a few failures, but supported them myself and got nice results. I would recommend that the heatshield to the side of the gun’s breach could do with being a bit thicker. Although accurate with regards to real scaled size, it’s almost seethrough when printed. Keep up the good work!

  140. KEVIN STAHL says:

    I love the detail of the models…just 1 complaint, and it’s huge for me, being a Bolt Action player….I can not make a good SES long range recon/scout sections, since all models in the stl. file are rifle/carbine armed…..PLEASE make a series 2 of these guys, but give the NCO an smg, and at least 2 of the regular troops smgs, as well as giving 2 models lmgs…..oh, and 1 VB launcher as well, lol

  141. gyhomoki says:

    Wonderful Magyar Királyi Honvédség character figures, and their weapons drawn up with the historical faithfulness!

Comments are closed.