Panther Command and Liaison vehicle (British)
This is a detailed model of the British Army's Panther vehicle, with designs suitable both for fdm and resin printers, as 1:100 scale. The British Army took delivery of over 400 Panthers, and used them extensively in several theatres of operation since 2009. It left service prematurely in 2019.
Versions with and without ECM fittings are provided.
The Panther LMV is based on a design by Iveco Defence Vehicles Division of Italy. It is designed primarily for strategic and tactical mobility with a high level of protection against anti-tank and anti-personnel mines, modular and with tuneable armour protection and stealthy design. Over 400 were delivered to the British Army from 2008, and have seen extensive service in several theatres of operations.
Two model designs are provided, and for each an integrated version for resin printers with suitable drainage, and a second version in parts for fdm printing are included. The fdm version has a separate roof to permit a fully detailed interior to be incorporated in the design, but some fitting is likely to be needed to ensure that this part matches properly after printing. Two wheel designs are provided for the fdm version, one providing a realistic representation of the hub, and a second with features exaggerated to make the model more attractive. Again, some fitting may be required for the wheels, as these parts are small and fdm printers are sometimes weak at indentations.
(The model photos are of an fdm model printed at relatively low resolution, and do not represent the quality that can be achieved from this design, especially in resin)
The product is offered for personal, non-commercial use. Derivative designs for personal use may be generated, but neither the original nor derivatives may be shared with others. Attribution of the design is requested should printed models be exhibited or otherwise shared. Models printed from this design or derivatives may not be sold commercially.
Versions with and without ECM fittings are provided.
The Panther LMV is based on a design by Iveco Defence Vehicles Division of Italy. It is designed primarily for strategic and tactical mobility with a high level of protection against anti-tank and anti-personnel mines, modular and with tuneable armour protection and stealthy design. Over 400 were delivered to the British Army from 2008, and have seen extensive service in several theatres of operations.
Two model designs are provided, and for each an integrated version for resin printers with suitable drainage, and a second version in parts for fdm printing are included. The fdm version has a separate roof to permit a fully detailed interior to be incorporated in the design, but some fitting is likely to be needed to ensure that this part matches properly after printing. Two wheel designs are provided for the fdm version, one providing a realistic representation of the hub, and a second with features exaggerated to make the model more attractive. Again, some fitting may be required for the wheels, as these parts are small and fdm printers are sometimes weak at indentations.
(The model photos are of an fdm model printed at relatively low resolution, and do not represent the quality that can be achieved from this design, especially in resin)
The product is offered for personal, non-commercial use. Derivative designs for personal use may be generated, but neither the original nor derivatives may be shared with others. Attribution of the design is requested should printed models be exhibited or otherwise shared. Models printed from this design or derivatives may not be sold commercially.
| Filename | Size | Last updated |
|---|---|---|
| Panther fdm.zip | 20.4 MiB | 2024-02-28 |
| Panther resin.zip | 21.9 MiB | 2024-02-28 |
