USS Enterprise - Aircraft Carrier
- Description
- Files
The USS Enterprise (CV-6) was an Aircraft Carrier of the United States Navy, she was a Yorktown class Carrier. She could carrier ~96 Aircraft. She has a somewhat different look compared to the Yorktown (CV-5) and Hornet (CV-8), mainly in island-layout and main mast. She survived WW2 as the most decorated ship of the war. Nicknames; The Big E, Lucky E, The Grey Ghost, The Galloping Ghost.
Decommissioned 17th February 1947 and scrapped about 10 years later.
The ship is modeled with late war Armament and radar setup.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The model is provided in 1/1000 scale and are Resin print only. (FDM for the Base)
1/1800 – resize to 55,56%
1/1200 – resize to 83,5%
There are named bases provided. The base comes in 2 versions. Text recessed and the raised. I used the recessed version for FDM printed bases. Do not forget to also re-scale the bases if you print in 1/1200 or 1/1800 scale.
Included 1/1800 scale pre-supported model which I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using standard resin. Use at your own risk, might be best you create your own supported files, which prints best on you own printer. Some parts are rather delicate, mainly the gun barrels, and you will need to remove support carefully.
The base was printed on an Ender 5 pro (0.16 mm layer) standard PLA. But feel free to print the bases on a resin printer, that will give you much better text on the base, but no supported files for the resin-printing of the bases are provided.
Decommissioned 17th February 1947 and scrapped about 10 years later.
The ship is modeled with late war Armament and radar setup.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The model is provided in 1/1000 scale and are Resin print only. (FDM for the Base)
1/1800 – resize to 55,56%
1/1200 – resize to 83,5%
There are named bases provided. The base comes in 2 versions. Text recessed and the raised. I used the recessed version for FDM printed bases. Do not forget to also re-scale the bases if you print in 1/1200 or 1/1800 scale.
Included 1/1800 scale pre-supported model which I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using standard resin. Use at your own risk, might be best you create your own supported files, which prints best on you own printer. Some parts are rather delicate, mainly the gun barrels, and you will need to remove support carefully.
The base was printed on an Ender 5 pro (0.16 mm layer) standard PLA. But feel free to print the bases on a resin printer, that will give you much better text on the base, but no supported files for the resin-printing of the bases are provided.
| Filename | Size | Last updated |
|---|---|---|
| USN-CV-6-Enterprise-late-war.zip | 35.6 MiB | 2025-01-28 |
