Jagdpanzer V Jagdpanther Tank Destroyer
- Description
- Reviews
- Files
Model Description:
This download contains a highly detailed model of a Jagdpanther tank destroyer, specifically the G2 variant. Documentation and references for the real vehicle were rigorously studied to make the model as geometrically accurate as possible, except in the cases where printability would have to be sacrificed (such as the fender thickness). This model contains two versions, one with and one without the side skirts.
The model is designed for resin 3D printing comes natively in 20mm (1/72) scale and includes a supported version for this size. Furthermore, the files are pre-hollowed, reducing the material requirements, improving the probability of print success, and ensuring no voids are present within the geometry.
The file is designed to be detailed enough to hold up well at larger scales however, including the common 28mm (~1/56) scale. Larger scales will have to be manually supported at present, however a future goal of TCR designs is to include supported files for larger scales, as well as a less-detailed version designed to function on FDM (filament) printers.
The model at its native scale took roughly 6 hours to print on an "Anycubic Photon Mono 4K" printer and has the following dimensions (including cannon):
Length - 5.4" (137mm)
Width - 1.8" (46mm)
Height - 1.5" (38mm)
Historical Description:
The Jagdpanzer V, often known as the "Jagdpanther" was a German tank destroyer fielded towards the end of World War II based on the Panzer V "Panther" chassis. The vehicle was equipped with the 88mm L/71 AT gun, capable of firing rounds at high velocity to knock out allied armor. The vehicle also featured a hull-mounted MG34 for protecting the vehicle from infantry. The Jagdpanther possessed 80mm of frontal armor, angled at 50 degrees. This provided a high degree of protection against most allied firepower. The side and rear armor of the vehicle was not nearly as strong, however.
In Armored Advance:
In armored advance the Jagdpanther is a highly effective tank hunter, able to pierce allied armor and deal a high amount of damage. The vehicle is mobile, being based on the Panther chassis while also possessing the same strong frontal armor. The sides, however, are very weak. The vehicle also possesses the "accurate" keyword, allowing it to keep the range advantage and have stronger effective armor, as well as a lower probability of being flanked. Naturally, the vehicle costs a fair amount of requisition to field due to its high level of performance, especially against cheaper units which may not be able to pierce it, and will take significant damage in return.
Contact Information:
If you face any problems with this vehicle, whether they be related to printability, integrity, or historical accuracy of the model, please contact us at [email protected]. We will do what we can to rectify any issues and improve the quality of the product for everyone.
This download contains a highly detailed model of a Jagdpanther tank destroyer, specifically the G2 variant. Documentation and references for the real vehicle were rigorously studied to make the model as geometrically accurate as possible, except in the cases where printability would have to be sacrificed (such as the fender thickness). This model contains two versions, one with and one without the side skirts.
The model is designed for resin 3D printing comes natively in 20mm (1/72) scale and includes a supported version for this size. Furthermore, the files are pre-hollowed, reducing the material requirements, improving the probability of print success, and ensuring no voids are present within the geometry.
The file is designed to be detailed enough to hold up well at larger scales however, including the common 28mm (~1/56) scale. Larger scales will have to be manually supported at present, however a future goal of TCR designs is to include supported files for larger scales, as well as a less-detailed version designed to function on FDM (filament) printers.
The model at its native scale took roughly 6 hours to print on an "Anycubic Photon Mono 4K" printer and has the following dimensions (including cannon):
Length - 5.4" (137mm)
Width - 1.8" (46mm)
Height - 1.5" (38mm)
Historical Description:
The Jagdpanzer V, often known as the "Jagdpanther" was a German tank destroyer fielded towards the end of World War II based on the Panzer V "Panther" chassis. The vehicle was equipped with the 88mm L/71 AT gun, capable of firing rounds at high velocity to knock out allied armor. The vehicle also featured a hull-mounted MG34 for protecting the vehicle from infantry. The Jagdpanther possessed 80mm of frontal armor, angled at 50 degrees. This provided a high degree of protection against most allied firepower. The side and rear armor of the vehicle was not nearly as strong, however.
In Armored Advance:
In armored advance the Jagdpanther is a highly effective tank hunter, able to pierce allied armor and deal a high amount of damage. The vehicle is mobile, being based on the Panther chassis while also possessing the same strong frontal armor. The sides, however, are very weak. The vehicle also possesses the "accurate" keyword, allowing it to keep the range advantage and have stronger effective armor, as well as a lower probability of being flanked. Naturally, the vehicle costs a fair amount of requisition to field due to its high level of performance, especially against cheaper units which may not be able to pierce it, and will take significant damage in return.
Contact Information:
If you face any problems with this vehicle, whether they be related to printability, integrity, or historical accuracy of the model, please contact us at [email protected]. We will do what we can to rectify any issues and improve the quality of the product for everyone.
No one's reviewed this product yet. Let people know if you enjoyed this model!
| Filename | Size | Last updated |
|---|---|---|
| Jagdpanther G2 Print Files.zip | 35.2 MiB | 2025-11-08 |
%20Cover.png)
%20Cover.png)