Panzerfaust 3 1/72 & 1/35
This 3D model of the Panzerfaust 3 is a must-have for modelers and hobbyists looking to add realism and detail to their projects. Available in 1/72 and 1/35 scales, the product offers exceptional versatility, making it suitable for a range of uses from dioramas to wargaming or scale models.
The set includes several versions of the Panzerfaust 3: a complete model, one without the rocket, and the rocket separately. This configuration provides a wide range of customization options, allowing modelers to create dynamic or static scenes as needed. Additionally, the files come presupported, making the 3D printing process much easier by eliminating the need for manual support configuration.
If you are going to print the models with supports included, it is important to have the correct exposure time. In case the models are not generated or are stuck to the fep, it is necessary to increase the exposure time. On the contrary, it is also common for models to be generated but these are overexposed. you can tell this because sometimes the uprights are fused to the figure. The exposure time varies depending on the resin, sometimes I set it to 2.5, other times to 4.5s
When removing the supports, I recommend using hot water to soften them. In case you have problems with printing, let me know at [email protected]
The set includes several versions of the Panzerfaust 3: a complete model, one without the rocket, and the rocket separately. This configuration provides a wide range of customization options, allowing modelers to create dynamic or static scenes as needed. Additionally, the files come presupported, making the 3D printing process much easier by eliminating the need for manual support configuration.
If you are going to print the models with supports included, it is important to have the correct exposure time. In case the models are not generated or are stuck to the fep, it is necessary to increase the exposure time. On the contrary, it is also common for models to be generated but these are overexposed. you can tell this because sometimes the uprights are fused to the figure. The exposure time varies depending on the resin, sometimes I set it to 2.5, other times to 4.5s
When removing the supports, I recommend using hot water to soften them. In case you have problems with printing, let me know at [email protected]
| Filename | Size | Last updated |
|---|---|---|
| Panzerfaust 3 (1-72,1-35).zip | 179.5 MiB | 2024-11-24 |
