Karabiner 98K 1/35
- Description
- Files
The Karabiner 98 kurz was adopted on 21 June 1935 as the standard service rifle by the German Wehrmacht.[1] It was one of the final developments in the long line of Mauser military rifles. Set includes a normal rifle and a sniper one, each one with pre-supported option for easy print.
If you are going to print the models with supports included, it is important to have the correct exposure time. In case the models are not generated or are stuck to the fep, it is necessary to increase the exposure time. On the contrary, it is also common for models to be generated but these are overexposed. you can tell this because sometimes the uprights are fused to the figure. The exposure time varies depending on the resin, sometimes I set it to 2.5, other times to 4.5s
When removing the supports, I recommend using hot water to soften them. In case you have problems with printing, let me know at [email protected]
If you are going to print the models with supports included, it is important to have the correct exposure time. In case the models are not generated or are stuck to the fep, it is necessary to increase the exposure time. On the contrary, it is also common for models to be generated but these are overexposed. you can tell this because sometimes the uprights are fused to the figure. The exposure time varies depending on the resin, sometimes I set it to 2.5, other times to 4.5s
When removing the supports, I recommend using hot water to soften them. In case you have problems with printing, let me know at [email protected]
| Filename | Size | Last updated |
|---|---|---|
| Karabiner 98K (1-72, 1-35).zip | 98.4 MiB | 2024-11-24 |
