1/56 Scale (28mm Scale) Wood Crates
This is a pack of 5 different sizes of wood crates. Each plank on each of the crates is individually sculpted. The nails that hold the different sides of the crates together have been sculpted into the model.
This is a pack of 5 different sizes of wood crates. Each plank on each of the crates is individually sculpted. The nails that hold the different sides of the crates together have been sculpted into the model.
The painting is fairly simple. Simply paint the different crates in the base colour of your choice. Then add a dark brown wash to sit in the grooves denoting the different planks. Then if you desire a dry brush of your choice. The different nails in the different crates can be picked out by using either silver or black paint.
These crates will be great to add to a harbour scene or simply as scatter terrain where they will be required according to your needs. They will be great in any table top game or can be used in diorama building.
They can also be resized in your slicing software according to your needs.
These crates will be able to be printed using both FDM or Resin printers. The model was printed on an Ender 3 V2 using PLA filament.
The settings I used are as follows:
Nozzle Temperature - 200 C
Bed Temperature - 60 C
Layer Height - 0.12mm
Infill - 20%
This is a pack of 5 different sizes of wood crates. Each plank on each of the crates is individually sculpted. The nails that hold the different sides of the crates together have been sculpted into the model.
The painting is fairly simple. Simply paint the different crates in the base colour of your choice. Then add a dark brown wash to sit in the grooves denoting the different planks. Then if you desire a dry brush of your choice. The different nails in the different crates can be picked out by using either silver or black paint.
These crates will be great to add to a harbour scene or simply as scatter terrain where they will be required according to your needs. They will be great in any table top game or can be used in diorama building.
They can also be resized in your slicing software according to your needs.
These crates will be able to be printed using both FDM or Resin printers. The model was printed on an Ender 3 V2 using PLA filament.
The settings I used are as follows:
Nozzle Temperature - 200 C
Bed Temperature - 60 C
Layer Height - 0.12mm
Infill - 20%
| Filename | Size | Last updated |
|---|---|---|
| 1-56 Wood Crates.zip | 189.3 MiB | 2024-02-28 |
