Jagdpanzer IV (L/48) Tank Destroyer
- Description
- Reviews
- Files
Model Description:
This download contains a highly detailed model of a Jagdpanzer IV tank destroyer. This version possesses the 75mm L/48 cannon and should not be confused with the Panzer IV/70 which has thicker armor and the L/70 cannon. Documentation and references for the real vehicle were rigorously studied to make the model as geometrically accurate as possible, except in the cases where printability would have to be sacrificed (such as the fender thickness).
The model is designed for resin 3D printing comes natively in 20mm (1/72) scale and includes a supported version for this size. Furthermore, the files are pre-hollowed, reducing the material requirements, improving the probability of print success, and ensuring no voids are present within the geometry.
The file is designed to be detailed enough to hold up well at larger scales however, including the common 28mm (~1/56) scale. Larger scales will have to be manually supported at present, however a future goal of TCR designs is to include supported files for larger scales, as well as a less-detailed version designed to function on FDM (filament) printers.
The model at its native scale took roughly 6 hours to print on an "Anycubic Photon Mono 4K" printer and has the following dimensions (including cannon):
Length - 3.95" (100mm)
Width - 1.69" (43mm)
Height - 1.06" (27mm)
Historical Description:
The Jagdpanzer IV is very similar to the Panzer IV/70 visually, however it possesses the less power L/48 cannon as well as thinner armor than the latter vehicle. The Jagdpanzer IV was a tank destroyer based on the Panzer IV chassis, with a casemate replacing the turret. The vehicle had a very low profile, making it difficult for allied vehicles to detect when it was in ambush. The frontal armor of the Jagdpanzer IV is quite strong due to the steep angle despite being relatively thin at only 60mm thick. The side and rear of the vehicle are very poorly armored, however.
In Armored Advance:
In armored advance the Jagdpanzer IV is a side-grade to the standard Panzer IV. it possesses the same cannon, just in a fixed casemate with the associated drawbacks and benefits of such a configuration. The vehicle has marginally better armor than the Panzer IV H but does lose some health as well as anti-infantry capabilities. The vehicle is slightly cheaper than the Panzer IV H, meaning it can be a viable choice if requisition is tight.
Contact Information:
If you face any problems with this vehicle, whether they be related to printability, integrity, or historical accuracy of the model, please contact us at [email protected]. We will do what we can to rectify any issues and improve the quality of the product for everyone.
This download contains a highly detailed model of a Jagdpanzer IV tank destroyer. This version possesses the 75mm L/48 cannon and should not be confused with the Panzer IV/70 which has thicker armor and the L/70 cannon. Documentation and references for the real vehicle were rigorously studied to make the model as geometrically accurate as possible, except in the cases where printability would have to be sacrificed (such as the fender thickness).
The model is designed for resin 3D printing comes natively in 20mm (1/72) scale and includes a supported version for this size. Furthermore, the files are pre-hollowed, reducing the material requirements, improving the probability of print success, and ensuring no voids are present within the geometry.
The file is designed to be detailed enough to hold up well at larger scales however, including the common 28mm (~1/56) scale. Larger scales will have to be manually supported at present, however a future goal of TCR designs is to include supported files for larger scales, as well as a less-detailed version designed to function on FDM (filament) printers.
The model at its native scale took roughly 6 hours to print on an "Anycubic Photon Mono 4K" printer and has the following dimensions (including cannon):
Length - 3.95" (100mm)
Width - 1.69" (43mm)
Height - 1.06" (27mm)
Historical Description:
The Jagdpanzer IV is very similar to the Panzer IV/70 visually, however it possesses the less power L/48 cannon as well as thinner armor than the latter vehicle. The Jagdpanzer IV was a tank destroyer based on the Panzer IV chassis, with a casemate replacing the turret. The vehicle had a very low profile, making it difficult for allied vehicles to detect when it was in ambush. The frontal armor of the Jagdpanzer IV is quite strong due to the steep angle despite being relatively thin at only 60mm thick. The side and rear of the vehicle are very poorly armored, however.
In Armored Advance:
In armored advance the Jagdpanzer IV is a side-grade to the standard Panzer IV. it possesses the same cannon, just in a fixed casemate with the associated drawbacks and benefits of such a configuration. The vehicle has marginally better armor than the Panzer IV H but does lose some health as well as anti-infantry capabilities. The vehicle is slightly cheaper than the Panzer IV H, meaning it can be a viable choice if requisition is tight.
Contact Information:
If you face any problems with this vehicle, whether they be related to printability, integrity, or historical accuracy of the model, please contact us at [email protected]. We will do what we can to rectify any issues and improve the quality of the product for everyone.
No one's reviewed this product yet. Let people know if you enjoyed this model!
| Filename | Size | Last updated |
|---|---|---|
| Jagdpanzer IV Print Files.zip | 36.4 MiB | 2025-11-20 |
%20Cover.png)
