Landing Craft Support - Large Mk1
- Description
- Reviews
- Files
Waterline-model of Landing Craft Support, Mark 1. A support craft, to provide AA and surface support in the landing area. It was not intended to beach, it was a large design LSC(M) with an added powered turret.Usually transported on the deck of a ship, it would be lowered in a loaded condition. No living accommodations are provided.
Armament: One 2-pdr and a coaxially Machine gun in a powered front Daimler-turret, one twin 0.50 Machine Gun in aft-turret, one 4" mortar and two 0.303 Lewis Machine guns. (Lewis guns not included.)
The model includes separate lifebuoy, mortar, Twin MG-turret, front turret and fuel-tank.
Copyright Allan Smit 2026
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The model has been prepared and detailed for 1:100 war-gaming (14cm long). It is waterline model and not a complete hull design. The Hull would be below water and would not work on a gaming table. The model is based on original drawings.
I have included Supported files for resin-printing, those worked fine for me. No guarantee they will work on our printer settings. So feel free to use, but might be best you create your own supported files.
There is also 1/56 (28mm) model which is prepared for FDM-printing, please use this Model.
Armament: One 2-pdr and a coaxially Machine gun in a powered front Daimler-turret, one twin 0.50 Machine Gun in aft-turret, one 4" mortar and two 0.303 Lewis Machine guns. (Lewis guns not included.)
The model includes separate lifebuoy, mortar, Twin MG-turret, front turret and fuel-tank.
Copyright Allan Smit 2026
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The model has been prepared and detailed for 1:100 war-gaming (14cm long). It is waterline model and not a complete hull design. The Hull would be below water and would not work on a gaming table. The model is based on original drawings.
I have included Supported files for resin-printing, those worked fine for me. No guarantee they will work on our printer settings. So feel free to use, but might be best you create your own supported files.
There is also 1/56 (28mm) model which is prepared for FDM-printing, please use this Model.
No one's reviewed this product yet. Let people know if you enjoyed this model!
| Filename | Size | Last updated |
|---|---|---|
| LCS-L-Mk1-15mm.zip | 71.2 MiB | 2026-02-13 |
