Renault FT Tank .stl pack - v 3.0 - FDM and resin print files

** Version 3.0 - updated 2021-December-17 **

This is a 28mm remix of the files of both Bergman and Tiger Ace, and thanks to both the crafters of those files.

** This is a v. 3.0 file, with much improved track .stl and files made for resin as well as the original FDM printing formats**

This is a 28mm remix of both noted files, and thanks to both the crafters of those files.
I upscaled the model to 28mm, carved off the tracks and trench crossing tail into separate files. I modified Tiger Ace's turrets and re-crafted both the MGs and cannon; in the interest of durability. I made a hull mounted turret pivot which enable a cleaner turret print plus you can easily swap out the turrets.
With FDM printing use 'support  all" WITH THE EXCEPTION OF THE "tail"; please print that without supports, as the cross members thwart efforts to clean out the supports on the tail section.
The FT was a WW1 tank but was widely employed in early WW2; by the Poles and the French, and many captured by the Axis were then employed in anti-partisan duties. The BA rules this as a very slow tank, but provides 7+ armour and a mobile MMG for only 35 points.

The pack has both FDM and resin appropriate files.

FDM needs to be printed with supports, with the exception of the tail, as noted above.

There is one set of pre-supported resin files with the tail attached to the hull. The hull is hollowed on this .stl.