Polish "Kresowiec" Armored Car easy print
Easy to print Polish "Kresowiec" Armored Car. Some details have been changed for looks/ printability.
Image is of model printed in 1/52 with 3dbreed figure for scale. The bent pipe is to replace the starter handle for the folks that may want to use this for more steampunk-y applications
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
Image is of model printed in 1/52 with 3dbreed figure for scale. The bent pipe is to replace the starter handle for the folks that may want to use this for more steampunk-y applications
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
| Filename | Size | Last updated |
|---|---|---|
| Kresowiec AC steam resin.stl | 2.2 MiB | 2024-02-28 |
| Kresowiec AC.stl | 2.9 MiB | 2024-02-28 |
| Kresowiec AC resin.stl | 2.0 MiB | 2024-02-28 |
