Grumman F3F
The Grumman F3F was/is a carrier based biplane fighter aircraft, one of the types of aircraft available and used by the United States Navy in WW2.
A total of 147 have been build.
Armament consisted of one 0.5 in Browning M2 machine gun and one 0.30 in M1919 Browning Machine Gun. It could carry two 53 kg bombs, one under each wing
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A 4 aircraft wings is provided, the wing has a left and a right option, this is done to create a stable model on the gaming-table, make sure you use the correct Base. The left-wing is provided supported, just mirror the pre-supported left-wing in your slicer to get the right-wing version.
Also included an version on wheels. You can use this model in 1/1800 scale to be placed on your Aircraft Carriers if you want. (None supported files only)
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
A total of 147 have been build.
Armament consisted of one 0.5 in Browning M2 machine gun and one 0.30 in M1919 Browning Machine Gun. It could carry two 53 kg bombs, one under each wing
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A 4 aircraft wings is provided, the wing has a left and a right option, this is done to create a stable model on the gaming-table, make sure you use the correct Base. The left-wing is provided supported, just mirror the pre-supported left-wing in your slicer to get the right-wing version.
Also included an version on wheels. You can use this model in 1/1800 scale to be placed on your Aircraft Carriers if you want. (None supported files only)
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
| Filename | Size | Last updated |
|---|---|---|
| Grumman-F3F-2.zip | 10.1 MiB | 2024-11-09 |
