Deweycat Objective Markers for table top gaming
This file consists of five different flags, numbered from 1 through to 5, plus a blank flag to which paint or a printed design can be applied. As well as two 60 x 60 bases, and three different 40mm x 60mm bases and the flag pole.
The pole and the actual flag each have a half circle that mates; carefully dry fit this before gluing. The pole is meant to be inserted and removed from the recess in the base; please don't the flag pole to the base if you want to store them easily in your game box.
I printed the ones in the photos at "draft" settings - 0.2mm layers. I would suggest printing the flags at fine - 0.1mm but the base and the pole are fine at a lower quality setting. I suggest using supports from the build plate.
The number on the flag is raised, which makes painting it easier; I used a "paint pen" to do so.
The pole and the actual flag each have a half circle that mates; carefully dry fit this before gluing. The pole is meant to be inserted and removed from the recess in the base; please don't the flag pole to the base if you want to store them easily in your game box.
I printed the ones in the photos at "draft" settings - 0.2mm layers. I would suggest printing the flags at fine - 0.1mm but the base and the pole are fine at a lower quality setting. I suggest using supports from the build plate.
** I strongly recommend a "brim" setting when printing the flags in FDM **
The number on the flag is raised, which makes painting it easier; I used a "paint pen" to do so.
| Filename | Size | Last updated |
|---|---|---|
| BA objective marker - updated Sept 2024.zip | 5.9 MiB | 2024-09-30 |
