BF Hind P Upgrade kit
Upgrade kit for BF 1/100 (15mm) Mi-24 Hinds to convert them into later versions and the P variant.
A set of pieces designed to allow upgrading your existing kits. The exhaust shrouds will need sanding and filling to fit the model.
This model features thorough hollowing, drain holes, and careful support placement to ensure optimal print quality. Thought has been put into making the components easy to paint, and detail is deeply recessed and exaggerated to avoid being drowned in thick paint.
Files come in supported and unsupported formats.
These models are optimised for detail at 1/100 or 15mm scale on a resin printer, but they should scale up well too.
Printer settings used for display models:
Slicer used:
Photon Workshop V2.1.23.RC8
A set of pieces designed to allow upgrading your existing kits. The exhaust shrouds will need sanding and filling to fit the model.
This model features thorough hollowing, drain holes, and careful support placement to ensure optimal print quality. Thought has been put into making the components easy to paint, and detail is deeply recessed and exaggerated to avoid being drowned in thick paint.
Files come in supported and unsupported formats.
These models are optimised for detail at 1/100 or 15mm scale on a resin printer, but they should scale up well too.
Printer settings used for display models:
- Anycubic Photon Mono
- Opaque Grey Anycubic Resin
- 0.03mm layer height
- 1.33s exposure time
- 23s bottom exposure time
- 8 bottom layers
- lift speed: 0.9mm/s
- 8x Antialiasing
- Environment: 19-23C, 60-80% humidity
Slicer used:
Photon Workshop V2.1.23.RC8
| Filename | Size | Last updated |
|---|---|---|
| hind_upgrade.zip | 4.1 MiB | 2024-09-23 |
