15mm Scud TEL kit

15mm compatible Scud TEL model for resin printers, with full hollowing. No supports.

Based on this model by JackTheTinkerer: https://www.thingiverse.com/thing:5496902. Original model has been dramatically remodeled, holes fixed, geometry altered, model split into kit form, hollowed, reinforced and rescaled. Some components have been made again from scratch.

Distributed commercially with attribution under CC BY 4.0 https://creativecommons.org/licenses/by/4.0/. I am not associated with nor supported by the pervious author.

This model features thorough hollowing, drain holes, and careful support placement to ensure optimal print quality. Thought has been put into making the components easy to paint, and detail is deeply recessed and exaggerated to avoid being drowned in thick paint.

Files come unsupported.

These models are optimized for detail at 1/100 or 15mm scale on a resin printer, but they should scale up well too.

Printer settings used for display models:

Anycubic Photon Mono
Grey Anycubic Resin
0.03mm layer height
1.5s exposure time
32s bottom exposure time
6 bottom layers
lift speed: 0.9mm/s
8x Antialiasing

Slicer used:

Photon Workshop V2.1.23.RC8