AMX 13 easy print with resin ATGMs
- Description
- Files
Easy to print AMX 13 with resin printable SS11 ATGMs. Some details have been changed for looks/ printability. This also includes the AMX turret that fits my m4a2 hull to make the Egyptian FL-10.
Image is of models printed in 1/52 with 3dbreed figure for scale.
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
Image is of models printed in 1/52 with 3dbreed figure for scale.
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
| Filename | Size | Last updated |
|---|---|---|
| AMX 13 FL10 turret resin.stl | 824.1 KiB | 2024-02-28 |
| AMX 13 turret w ss11 ATGM resin.stl | 1.5 MiB | 2024-02-28 |
| AMX 13 chassis resin.stl | 3.8 MiB | 2024-02-28 |
| AMX 13 ss11 atgm resin.stl | 1018.8 KiB | 2024-02-28 |
| AMX 13 turret resin.stl | 483.7 KiB | 2024-02-28 |
| AMX 13.stl | 4.5 MiB | 2024-02-28 |
| AMX 13 FL10 turret.stl | 543.2 KiB | 2024-02-28 |
