Concrete elephant slide easy print
Should you like this model and want to get models like it throughout the month, please join the Patreon over at: https://www.patreon.com/WGraves
Easy to print Concrete elephant slide. Some details have been changed for looks/ printability.
East German "Kunst am Bau" concrete elephant slide, designed 1962, produced from 1965-. Apparently these were all over the place in east germany and I can find pictures of at least half a dozen that still exist. The stairs on these seem to have been replaced over the years with safer versions, mine is closer to the original.
The base is evident in a few of the images but most are covered by play sand, grass, or dirt.
Image is of model printed in 1/52 with 3dbreed figure for scale.
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
Easy to print Concrete elephant slide. Some details have been changed for looks/ printability.
East German "Kunst am Bau" concrete elephant slide, designed 1962, produced from 1965-. Apparently these were all over the place in east germany and I can find pictures of at least half a dozen that still exist. The stairs on these seem to have been replaced over the years with safer versions, mine is closer to the original.
The base is evident in a few of the images but most are covered by play sand, grass, or dirt.
Image is of model printed in 1/52 with 3dbreed figure for scale.
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
| Filename | Size | Last updated |
|---|---|---|
| Kunst am Bau elephant slide base.stl | 21.7 KiB | 2024-02-28 |
| Kunst am Bau elephant slide resin.stl | 637.6 KiB | 2024-02-28 |
| Kunst am Bau elephant slide.stl | 780.2 KiB | 2024-02-28 |
| Kunst am Bau elephant slide w base resin.stl | 659.4 KiB | 2024-02-28 |
