1:100 9S32 "Grill Pan" Engagement Radar Vehicle
The Russian 9S32 Radar, NATO code name “Grill Pan”, is a mobile multichannel missile engagement guidance radar developed in 1983.
The 9S32 Grill Pan is a part of the Anti Ballistic Missile (ABM) S-300V defense system which was developed to engage short and intermediate range ballistic missiles. Capable of engaging up to 6 targets at the same time, the 9S32 is tasked with detecting and defending, with the help of the S-300V, task forces, and vital industrial and military installations against mass air attacks. The 9S32 is also capable of engaging cruise missiles, strategic and tactical aircraft, as well as early warning and electronic warfare aircraft.
Printing Destructions:
IMPORTANT: DO NOT ALLOW PROGRAMS LIKE WINDOWS NATIVE 3D BUILDER TO REPAIR THE MODEL OR YOU WILL GET ERRORS THAT MAY OR MAY NOT ALLOW THE MODEL TO PRINT CORRECTLY
I have not broken this model up at all and it will fit on the old school Elegoo Mars printers just fine if you print it vertically. I prefer to print these on my Peopoly so not only can I print them in 1 piece I can print 12 at a time. It does come with the radar and chassis separate though for those that like to point things at other things ( shrug lol ).
Aside from that, on printers like Elegoo Mars and Anycubic Photon, if you rotate the model 90 degrees with the end down, just add your supports and print away. The weapons are modeled onto the aircraft and once I get my camera situation sorted out I’ll post pics, prints just fine
For resin I prefer to use Siraya Tech Simple Clear mixed with Tenacious. I use 75-80 Simple to 20-25% Tenacious. This has not given me any problems since I started this mix and the only time I get failures now is when I am experimenting with things or forget to do my supports right.
The 9S32 Grill Pan is a part of the Anti Ballistic Missile (ABM) S-300V defense system which was developed to engage short and intermediate range ballistic missiles. Capable of engaging up to 6 targets at the same time, the 9S32 is tasked with detecting and defending, with the help of the S-300V, task forces, and vital industrial and military installations against mass air attacks. The 9S32 is also capable of engaging cruise missiles, strategic and tactical aircraft, as well as early warning and electronic warfare aircraft.
Printing Destructions:
IMPORTANT: DO NOT ALLOW PROGRAMS LIKE WINDOWS NATIVE 3D BUILDER TO REPAIR THE MODEL OR YOU WILL GET ERRORS THAT MAY OR MAY NOT ALLOW THE MODEL TO PRINT CORRECTLY
I have not broken this model up at all and it will fit on the old school Elegoo Mars printers just fine if you print it vertically. I prefer to print these on my Peopoly so not only can I print them in 1 piece I can print 12 at a time. It does come with the radar and chassis separate though for those that like to point things at other things ( shrug lol ).
Aside from that, on printers like Elegoo Mars and Anycubic Photon, if you rotate the model 90 degrees with the end down, just add your supports and print away. The weapons are modeled onto the aircraft and once I get my camera situation sorted out I’ll post pics, prints just fine
For resin I prefer to use Siraya Tech Simple Clear mixed with Tenacious. I use 75-80 Simple to 20-25% Tenacious. This has not given me any problems since I started this mix and the only time I get failures now is when I am experimenting with things or forget to do my supports right.
| Filename | Size | Last updated |
|---|---|---|
| IHWS_9S32_Grill_Pan_Engagement_Radar_1-100.zip | 19.7 MiB | 2024-08-01 |
