1:100 SA-12a "Gladiator" Missile Vehicle
- Description
- Files
The SA-12a "Gladiator" is a Russian-made air defense missile system mounted on a tracked armored vehicle. The S-300V is designed and manufactured by the Russian Defense Company Antey.
The SA-12A Gladiator is used primarily for targeting aircraft with a range of 75 km and a max altitude of 25 km. The S-300V system uses a phased-array sector-scan radar with a range of 175 km and can track up to 16 targets simultaneously. The V suffix of the S-300V complex is used for Voyska (Ground forces). The S-300V air defense missile system is designed to provide air defense of task forces and key military and state installations against mass attacks by theatre and tactical ballistic missiles, aeroballistics and cruise missiles, strategic and tactical aircraft, as well as to engage loitering ECM aircraft and other airstrike assets. The S-300V system is a mobile multi-channel long-range surface-to-air missile system. It can provide effective theatre missiles and air defense. The system has high jamming immunity, and therefore is capable of engaging aerial targets in heavy ECM and fire counteraction, in any weather, by day and night.
Printing Destructions:
IMPORTANT: DO NOT ALLOW PROGRAMS LIKE WINDOWS NATIVE 3D BUILDER TO REPAIR THE MODEL OR YOU WILL GET ERRORS THAT MAY OR MAY NOT ALLOW THE MODEL TO PRINT CORRECTLY
I have broken this model up some and it will fit on the old school Elegoo Mars printers just fine if you print it vertically. I prefer to print these on my Peopoly so not only can I print them in 1 piece I can print 12 at a time. It does come with both a stowed and deployed version. The stowed version is 1 piece while the deployed version is in several pieces to help avoid super tiny or thin bits. That being said, there is also an OBJ file with the assembled vehicle included for reference when you go to glue it together.
Aside from that, on printers like Elegoo Mars and Anycubic Photon, if you rotate the model 90 degrees with the end down, just add your supports and print away. The weapons are modeled onto the aircraft and once I get my camera situation sorted out I’ll post pics, prints just fine
For resin I prefer to use Siraya Tech Simple Clear mixed with Tenacious. I use 75-80 Simple to 20-25% Tenacious. This has not given me any problems since I started this mix and the only time I get failures now is when I am experimenting with things or forget to do my supports right.
The SA-12A Gladiator is used primarily for targeting aircraft with a range of 75 km and a max altitude of 25 km. The S-300V system uses a phased-array sector-scan radar with a range of 175 km and can track up to 16 targets simultaneously. The V suffix of the S-300V complex is used for Voyska (Ground forces). The S-300V air defense missile system is designed to provide air defense of task forces and key military and state installations against mass attacks by theatre and tactical ballistic missiles, aeroballistics and cruise missiles, strategic and tactical aircraft, as well as to engage loitering ECM aircraft and other airstrike assets. The S-300V system is a mobile multi-channel long-range surface-to-air missile system. It can provide effective theatre missiles and air defense. The system has high jamming immunity, and therefore is capable of engaging aerial targets in heavy ECM and fire counteraction, in any weather, by day and night.
Printing Destructions:
IMPORTANT: DO NOT ALLOW PROGRAMS LIKE WINDOWS NATIVE 3D BUILDER TO REPAIR THE MODEL OR YOU WILL GET ERRORS THAT MAY OR MAY NOT ALLOW THE MODEL TO PRINT CORRECTLY
I have broken this model up some and it will fit on the old school Elegoo Mars printers just fine if you print it vertically. I prefer to print these on my Peopoly so not only can I print them in 1 piece I can print 12 at a time. It does come with both a stowed and deployed version. The stowed version is 1 piece while the deployed version is in several pieces to help avoid super tiny or thin bits. That being said, there is also an OBJ file with the assembled vehicle included for reference when you go to glue it together.
Aside from that, on printers like Elegoo Mars and Anycubic Photon, if you rotate the model 90 degrees with the end down, just add your supports and print away. The weapons are modeled onto the aircraft and once I get my camera situation sorted out I’ll post pics, prints just fine
For resin I prefer to use Siraya Tech Simple Clear mixed with Tenacious. I use 75-80 Simple to 20-25% Tenacious. This has not given me any problems since I started this mix and the only time I get failures now is when I am experimenting with things or forget to do my supports right.
| Filename | Size | Last updated |
|---|---|---|
| IHWS_SA-12a_Gladiator_Missile_Vehicle_1-100.zip | 22.2 MiB | 2024-08-01 |
