Vought SB2U Vindicator
The Vought SB2U Vindicator was/is a carrier based dive-bomber, one of the types of aircraft available and used by the United States Air-force in WW2.
A total of 260 have been build.
Armament consisted of one 0.5 in forward-firing Browning M2 machine gun in the starboard wing and one a flexible mount in the rear cockpit. It could carry one 450 kg or one 230 kg bomb under the fuselage. And two 45 kg and eight 14 kg bombs under the wings.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A one, two and three aircraft wing is provided and a base for the Dive-Bomber (D) option.
Also included an version on wheels and a version on wheels and wings folded. You can use these models in 1/1800 scale to be placed on your Aircraft Carriers if you want. (None supported files only)
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
A total of 260 have been build.
Armament consisted of one 0.5 in forward-firing Browning M2 machine gun in the starboard wing and one a flexible mount in the rear cockpit. It could carry one 450 kg or one 230 kg bomb under the fuselage. And two 45 kg and eight 14 kg bombs under the wings.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A one, two and three aircraft wing is provided and a base for the Dive-Bomber (D) option.
Also included an version on wheels and a version on wheels and wings folded. You can use these models in 1/1800 scale to be placed on your Aircraft Carriers if you want. (None supported files only)
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
| Filename | Size | Last updated |
|---|---|---|
| SB2U-Vindicator.zip | 12.6 MiB | 2024-11-09 |
