Vickers A1E1 Independent Tank 1/56
- Description
- Files
The Vickers A1E1 Independent was an inter-war tank designed as a breakthrough tank. With 5 turrets the tank was well armed but it never got taken forward into production, however, the plans were stolen and sold to the Russians (for a grand total of £40) and were said to have inspired the T-35.
for more details see:
https://en.wikipedia.org/wiki/Vickers_A1E1_Independent
Ideal for interwar what-if scenarios.
This is an STL in 4 parts: Hull, Main Turret, AA Turret and MG Turret
The finished model is approximately 5" x 2"
To complete the print you will need to print 1 Hull , 1 Main turret, 1 AA Turret and 3 of the MG turrets.
It is recommended to print the hull vertically to minimise supports.
The model shown was printed at 0.05mm layer height on my Anycubic Photon using Anycubic Basic Black resin.
This work is Copyright 2019.
Purchasing these files gives you the right to use them for your own personal use only. Redistribution or commercial use is not permitted.
Use in digital media such as photographs or videos is permitted if attribution is provided.
for more details see:
https://en.wikipedia.org/wiki/Vickers_A1E1_Independent
Ideal for interwar what-if scenarios.
This is an STL in 4 parts: Hull, Main Turret, AA Turret and MG Turret
The finished model is approximately 5" x 2"
To complete the print you will need to print 1 Hull , 1 Main turret, 1 AA Turret and 3 of the MG turrets.
It is recommended to print the hull vertically to minimise supports.
The model shown was printed at 0.05mm layer height on my Anycubic Photon using Anycubic Basic Black resin.
This work is Copyright 2019.
Purchasing these files gives you the right to use them for your own personal use only. Redistribution or commercial use is not permitted.
Use in digital media such as photographs or videos is permitted if attribution is provided.
| Filename | Size | Last updated |
|---|---|---|
| A1E1-Tank.zip | 11.9 MiB | 2024-02-28 |
