Sturmgeschütz (StuG) IV conversion kit
Krupp didn't build the Panzer III used for StuG III so they adapted the StuG superstructure to fit the Panzer IV
https://en.wikipedia.org/wiki/Sturmgesch%C3%BCtz_IV
This is a conversion kit for the Rubicon Panzer IV Ausf J kit. The upper hull must be cut as per the photos and the front right upper hull peg cut flush to the deck. Some of the molded on tools also need to be trimmed.
The photograph shows additional track stowage from Rubicon kits
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
Krupp didn't build the Panzer III used for StuG III so they adapted the StuG superstructure to fit the Panzer IV
https://en.wikipedia.org/wiki/Sturmgesch%C3%BCtz_IV
This is a conversion kit for the Rubicon Panzer IV Ausf J kit. The upper hull must be cut as per the photos and the front right upper hull peg cut flush to the deck. Some of the molded on tools also need to be trimmed.
The photograph shows additional track stowage from Rubicon kits
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
https://en.wikipedia.org/wiki/Sturmgesch%C3%BCtz_IV
This is a conversion kit for the Rubicon Panzer IV Ausf J kit. The upper hull must be cut as per the photos and the front right upper hull peg cut flush to the deck. Some of the molded on tools also need to be trimmed.
The photograph shows additional track stowage from Rubicon kits
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
Krupp didn't build the Panzer III used for StuG III so they adapted the StuG superstructure to fit the Panzer IV
https://en.wikipedia.org/wiki/Sturmgesch%C3%BCtz_IV
This is a conversion kit for the Rubicon Panzer IV Ausf J kit. The upper hull must be cut as per the photos and the front right upper hull peg cut flush to the deck. Some of the molded on tools also need to be trimmed.
The photograph shows additional track stowage from Rubicon kits
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
| Filename | Size | Last updated |
|---|---|---|
| MG Shield.stl | 185.8 KiB | 2024-02-28 |
| Gun.stl | 1.1 MiB | 2024-02-28 |
| Casemate (1).stl | 2.3 MiB | 2024-02-28 |
