Landmatress

This is my version of the Canadian multiple rocket launcher AKA the Land matress. The launcher was developed in 1944 and used by the Canadian and the British at the later stages of the war. It fired 76 mm rockets at a rate of 4 rockets per second.

There are three types of files included.

• The basic files for you to add your own supports and hollowing


• Chitubox project files. These are the testprinted files. These supports may not suit your preferences or your printer.


• The Chitubox project files saved as STL.

The files has been testprinted on a Annycubic Photon mono 4K with Phrozen Aqua-Grey 4K.

The files was prepared in Chitubox.

Settings.
Exposure time: 2
Lift Distance (mm): 1.5
Lift Speed (mm/min):120
Bottom Exposure Time: 40
Layer Height (mm):0.05
Retract Speed (mm/min):180

The files is offered for personal, non-commercial use. Derivative designs for personal use may be generated, but neither the original nor derivatives may be shared with others.  Models printed from this design or derivatives may not be sold commercially.

The product is designed for Resin printing and has not been test printed on a FDM printer.