Early Churchill Mega Pack
- Description
- Reviews (5.0)
- Files
All of my early Churchills in one big pack
Mks 1, 1CS, 2, 2 Oke, 3, 4, 5, AVRE, Gun Carrier and Great Eastern.
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
All of my early Churchills in one big pack
Mks 1, 1CS, 2, 2 Oke, 3, 4, 5, AVRE, Gun Carrier and Great Eastern.
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
Mks 1, 1CS, 2, 2 Oke, 3, 4, 5, AVRE, Gun Carrier and Great Eastern.
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
All of my early Churchills in one big pack
Mks 1, 1CS, 2, 2 Oke, 3, 4, 5, AVRE, Gun Carrier and Great Eastern.
Drawn in in Fusion 360 at 1/56 scale designed for resin printing.
No commercial use, personal use only, may not be shared, uploaded or otherwise distributed.
Copyright Richard Humble 2022
Posted by PS on 2025-09-13
I used my preferred slicer, ChituBox and printed my Great Eastern Ramps on my Elegoo Saturn 4 Ultra (12K) (standard speed) using 75% Anycubic Plant-based resin mixed with 25% Siraya Tech Tough Resin (my usual blend). The print time was around 6 hours, as I had oriented the ramps almost vertically, so I could use light supports. Lots of care and patience were needed in taking the supports off the Ramps, but it all went pretty well. You also need to remember to print two of all the supporting hardware and to "mirror" one of the Rocet Launches as they are left and right-handed. The measuring device is attached to the Port side ramp mounts. There is an obvious placement "mark" on the Port Side Ramp mounts, but I missed it and had to ask Richard (Flyde Armouries) for advice. Richard was very generous with his information.
| Filename | Size | Last updated |
|---|---|---|
| AVRE Hull track and gun-2.zip | 8.5 MiB | 2024-06-16 |
| Churchill Gun Carrier-2.zip | 6.5 MiB | 2024-06-16 |
| Churchill readme.txt | 857 B | 2024-06-16 |
| Great Eastern Ramp-2.zip | 14.6 MiB | 2024-06-16 |
| Mk1 Mk2 Hull-2.zip | 15.3 MiB | 2024-06-16 |
| Mk1 Mk2 Turret-2.zip | 1.7 MiB | 2024-06-16 |
| Mk3 Mk4 Mk5 Hull-2.zip | 7.8 MiB | 2024-06-16 |
| Mk3 turret-4.zip | 615.3 KiB | 2024-06-16 |
| Mk4 Turret-2.zip | 530.8 KiB | 2024-06-16 |
| Mk4 Turret improved.stl | 4.2 MiB | 2024-06-16 |
| Oke Parts-2.zip | 7.0 MiB | 2024-06-16 |
| Wading Kit-5.zip | 86.5 KiB | 2024-06-16 |
