City House Corner

The scale of the building is 15mm (1:100)
Main Floor 100mm X 100mm X 28 - no support
First Floor 100mm X 100mm X 28 - no support
Roof 100mm X 100mm X 45mm - no support
Bottom plate - no support
Store sign in French or German

The bottom plate need to be glue under the first floor or under the roof. This help to stack each level perfectly during the game. You may choose to not use them and it will work just fine as well.

You have two option of shutter - open or close that you can glue.

Store sign can be glue to the model or you can use magnet (5mm) to be able to place on the model and replace them as needed.

This corner house is part of a series of houses to create a village or a small town ... These houses can also be alone. As in any city, the houses are separated from each other or can be placed next to each other, commonly called row houses.

My houses of different styles give you the opportunity to be by themselves or place against each other, it is your choice, which reduces the need to have many house models for different circumstances. Another option you have is to be able to change the roof or the floor with another of my model that have the same characteristic in size and form.

I recommend printing them at .2mm layers, with supports from the build plate only. Even if you don't need support for printing

You can find more about this model here:
https://www.youtube.com/watch?v=I-Uiue_sWcw