UH-60A Blackhawk for 15mm

15mm compatible UH-60A Blackhawk model for resin printers, with full hollowing, supports, and BF flight stand compatibility. Comes in open and closed options.

The UH-60 Blackhawk was an American utility helicopter designed as a replacement to the venerable UH-1 Huey. Today it sees service throughout the US armed forces and beyond as a general use helicopter.

This model features thorough hollowing, drain holes, and careful support placement to ensure optimal print quality. Thought has been put into making the components easy to paint, and detail is deeply recessed and exaggerated to avoid being drowned in thick paint.

Note that due to the fragility of printed resin, some minor antennas and handles have been omitted.

Included in this download are all the files you will need to print the UH-60A.

Files come in supported and unsupported formats.

These models are optimized for detail at 1/100 or 15mm scale on a resin printer, but they should scale up well too.

Approximate printed dimensions of fuselage (excl. rotors and antennae):
L 150 W 43 H 42 mm

Printer settings used for test models:

Anycubic Photon Mono
Grey Anycubic Resin
0.03mm layer height
1.5s exposure time
32s bottom exposure time
6 bottom layers
lift speed: 0.9mm/s
8x Antialiasing

Slicer used:

Photon Workshop V2.1.23.RC8