IJN Akagi Aircraft Carrier
The IJN CV Akagi was an Aircraft Carrier for the Imperial Japanese Navy. She could carrier 66 Airplanes (+ 25 reserve)
She was damaged by aircraft during the battle of Midway and scuttled, June 1942.
The model as provided in the setup after her reconstruction in the 1930's.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The model is provided in 1/1000 scale and are Resin print only. (FDM for the Base)
1/1800 – resize to 55,56%
1/1200 – resize to 83,5%
There are 2 models of the IJN Akagi provided, a version with the 25 mm AA guns mounted and a version without the 25mm AA guns.
There are named bases provided. The base comes in 2 versions. Text recessed and the raised. I used the recessed version for FDM printed bases. Do not forget to also re-scale the bases if you print in 1/1200 or 1/1800 scale.
Included 1/1800 scale pre-supported model which I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using standard resin. This version has no 25 mm AA mounted, I forgot to add them in the test-print. Use at your own risk, might be best you create your own supported files, which prints best on you own printer. Some parts are rather delicate, mainly the gun barrels, and you will need to remove support carefully.
The base was printed on an Ender 5 pro (0.16 mm layer) standard PLA.
She was damaged by aircraft during the battle of Midway and scuttled, June 1942.
The model as provided in the setup after her reconstruction in the 1930's.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The model is provided in 1/1000 scale and are Resin print only. (FDM for the Base)
1/1800 – resize to 55,56%
1/1200 – resize to 83,5%
There are 2 models of the IJN Akagi provided, a version with the 25 mm AA guns mounted and a version without the 25mm AA guns.
There are named bases provided. The base comes in 2 versions. Text recessed and the raised. I used the recessed version for FDM printed bases. Do not forget to also re-scale the bases if you print in 1/1200 or 1/1800 scale.
Included 1/1800 scale pre-supported model which I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using standard resin. This version has no 25 mm AA mounted, I forgot to add them in the test-print. Use at your own risk, might be best you create your own supported files, which prints best on you own printer. Some parts are rather delicate, mainly the gun barrels, and you will need to remove support carefully.
The base was printed on an Ender 5 pro (0.16 mm layer) standard PLA.
| Filename | Size | Last updated |
|---|---|---|
| IJN-CV-Akagi.zip | 41.5 MiB | 2024-11-24 |
