CAC Wirraway
The CAC Wirraway was a training and general purpose Australian aircraft, one of the types of aircraft available and used by the Royal Australian Air Force and Navy, also the Royal Air Force and United States Army Air Force operated a limited number CAC Wirraway's.
A total of 755 have been build.
Armament consisted of four 0.5 in Browning M2 machine gun with 450 rounds per gun. It could carry two 45.4 kg bombs and/or two 220 liter drop tanks.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A 1, 2, 3 and 4 aircraft wings are provided, the 4 aircraft wing has a left and a right option, this is done to create a stable model on the gaming-table, make sure you use the correct Base. Just mirror the pre-supported left-wing in your slicer to get the right-wing version. Only the 1 and 2 aircraft wings are provided supported.
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
A total of 755 have been build.
Armament consisted of four 0.5 in Browning M2 machine gun with 450 rounds per gun. It could carry two 45.4 kg bombs and/or two 220 liter drop tanks.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A 1, 2, 3 and 4 aircraft wings are provided, the 4 aircraft wing has a left and a right option, this is done to create a stable model on the gaming-table, make sure you use the correct Base. Just mirror the pre-supported left-wing in your slicer to get the right-wing version. Only the 1 and 2 aircraft wings are provided supported.
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
| Filename | Size | Last updated |
|---|---|---|
| CAC-Wirraway.zip | 11.5 MiB | 2024-11-10 |
