RDF/LT or HSTV-L
1/100 compatible HSTV-L or RDF/LT stl
This model is intended to represent the AAI Corporation's most realistic proposal for the Rapid Deployment Force Light Tank (RDF/LT) as requested by the US Army in the 1970's. This model is closely based on the technology demonstrator, the High Survivability Test Vehicle, Light or HSTV-L.
This model comes with unsupported and supported .stl's scaled for 1/100, however it should print well scaled up as well. Turret, hull, tracks, CIP plates and smoke dispensers are separate pieces. Pieces are hollowed out as much as is practical.
This model is intended to be printed on a resin printer, so bear in mind some detail may be too fine for FDM printers.
Approximate total size at 1/100 (incl. gun):
Printer used for images:
Slicer used:
This model is intended to represent the AAI Corporation's most realistic proposal for the Rapid Deployment Force Light Tank (RDF/LT) as requested by the US Army in the 1970's. This model is closely based on the technology demonstrator, the High Survivability Test Vehicle, Light or HSTV-L.
- Infantry not included
This model comes with unsupported and supported .stl's scaled for 1/100, however it should print well scaled up as well. Turret, hull, tracks, CIP plates and smoke dispensers are separate pieces. Pieces are hollowed out as much as is practical.
This model is intended to be printed on a resin printer, so bear in mind some detail may be too fine for FDM printers.
Approximate total size at 1/100 (incl. gun):
- L 85 W30 H 25 mm
Printer used for images:
- Anycubic Photon Mono
- Translucent Green Anycubic Resin
- 0.03mm layer height
- 1.4s exposure time
- 24s bottom exposure time
- 5 bottom layers
- lift speed: 1mm/s
- 8x Antialiasing
Slicer used:
- Photon Workshop V2.1.23.RC8
| Filename | Size | Last updated |
|---|---|---|
| HSTVL_RDFLT-1.zip | 2.9 MiB | 2024-02-28 |
