Utrecht Dutch Battleship (Proposed) - Thin base
Utretch
I am adding the rest of my models to this site (see www.magpiedesigner.com for details). If you are interested in a particular model please let me know and I'll move it up the queue.
Ship name
This model is a proposed Dutch vessel. In mid 1030's the Dutch considered making a Battleship based on the German Gneisenau class BB. Obviously, it went nowhere but this is my interpretation of what that vessel might have looked like. I have named this vessel "Utrecht".
Thin Base
See my other listings for alternative bases (Waterline, Deep and Wide)
This base is thin (hence the name) about 2-3mm thick and has 'waves' and a 'wake' embossed on it. It has a plaque at the stern with its name on it. Also included is a version which does not have a name (or class) so you can paint your own on (or print, on paper, and glue on).
Each of the above versions has four files:
Printing
Designed to be printed with a Layer Thickness of .03 mm, no supports required. I have added some very thin (0.3mm diameter) supports under things like the main gun barrels and aircraft wings. These are easy to remove with a scalpel or craft knife.
It can be rescaled to 1:2400 but care would be needed with the smaller parts.
The model has been run thru 3D builder and successfully printed.
I am adding the rest of my models to this site (see www.magpiedesigner.com for details). If you are interested in a particular model please let me know and I'll move it up the queue.
Ship name
This model is a proposed Dutch vessel. In mid 1030's the Dutch considered making a Battleship based on the German Gneisenau class BB. Obviously, it went nowhere but this is my interpretation of what that vessel might have looked like. I have named this vessel "Utrecht".
Thin Base
See my other listings for alternative bases (Waterline, Deep and Wide)
This base is thin (hence the name) about 2-3mm thick and has 'waves' and a 'wake' embossed on it. It has a plaque at the stern with its name on it. Also included is a version which does not have a name (or class) so you can paint your own on (or print, on paper, and glue on).
Each of the above versions has four files:
- …….lys A file for use with the Lychee slicer.
- ……(Solid).stl A solid model.
- ……(Hollow).stl A hollowed version.
- ……(Supported).stl A version on supports ready to print.
Printing
Designed to be printed with a Layer Thickness of .03 mm, no supports required. I have added some very thin (0.3mm diameter) supports under things like the main gun barrels and aircraft wings. These are easy to remove with a scalpel or craft knife.
It can be rescaled to 1:2400 but care would be needed with the smaller parts.
The model has been run thru 3D builder and successfully printed.
| Filename | Size | Last updated |
|---|---|---|
| Utretch (Thin).zip | 39.2 MiB | 2025-02-15 |
