Fokker C.X.
Fokker C.X, one of the types of aircraft used by the Dutch in 1942 during the defense of the Dutch East Indies. This is the Dutch version, with the Rolls-Royce Kestrel engine. The Finnish version was equipped with the Bristol-Pegasus Radial Engine.
The Fokker C.X. was designed as a scout and light bomber in 1933. I was armed with one 7.9 mm Machine guns in the front fuselage and one was placed in the rear cockpit. The Fokker could carry a bomb-load of 400 kg; either 16 x 25kg, 8 x 50kg or 4 x 100kg.
The Fokkers performed well in the The Netherlands in May 1940 in ground attack roles and did take only minor loses. In the Dutch East Indies the C.X. took part in attacks on Japanese shipping and scout missions.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A Fighter option (4 aircraft in a wing, use base left or right) a Bomber option (3 aircraft in a wing, use Base-Mid-D) and a Scout option (1 or 2 aircraft in a wing)
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
The four aircraft wing has a left and a right option, this is done to create a stable model on the gaming-table, make sure you use the correct Base. The left-wing is provided supported, just mirror the left-wing in your slicer to get the right-wing version.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
The Fokker C.X. was designed as a scout and light bomber in 1933. I was armed with one 7.9 mm Machine guns in the front fuselage and one was placed in the rear cockpit. The Fokker could carry a bomb-load of 400 kg; either 16 x 25kg, 8 x 50kg or 4 x 100kg.
The Fokkers performed well in the The Netherlands in May 1940 in ground attack roles and did take only minor loses. In the Dutch East Indies the C.X. took part in attacks on Japanese shipping and scout missions.
Copyright Allan Smit 2024
Non Commercial and personal use only. May not be shared, uploaded or otherwise distributed.
The aircraft model has been prepared and detailed in 1/1000 scale. A 1/1000 scale in-flight model is included.
Print ready in 1/1200, meaning including bases and supported files are provided in 1/1200 scale. Which I used for test-printing. They worked fine for me, but no guarantee the files work on your own printer, so might be best you create your own supported files.
3 types of bases are provided, hexagonal, square or round and there is an option for a low (2 cm) or high (3 cm) base. A Fighter option (4 aircraft in a wing, use base left or right) a Bomber option (3 aircraft in a wing, use Base-Mid-D) and a Scout option (1 or 2 aircraft in a wing)
I have included the 3 bases (round, hexagonal, square) without text. You can add your text or letters if you want.
The four aircraft wing has a left and a right option, this is done to create a stable model on the gaming-table, make sure you use the correct Base. The left-wing is provided supported, just mirror the left-wing in your slicer to get the right-wing version.
Test-printed using a Anycubic Mono SE using Anycubic basic resin, 0.04mm layer.
| Filename | Size | Last updated |
|---|---|---|
| Fokker-C.X.zip | 42.1 MiB | 2024-09-28 |
