The DANA SPG system is a Czechoslovakian wheeled artillery piece developed in the cold war due to Czechoslovakia’s unwillingness to purchase soviet 2S3 Akatsiya SPGs. It features a 155mm autoloading cannon capable of reloading at any elevation allowing for high rates of fire.
This model features thorough hollowing, drain holes, and careful support placement to ensure optimal print quality. Thought has been put into making the components easy to paint, and detail is deeply recessed and exaggerated to avoid being drowned in thick paint.
Included in this download are all the files you will need: a hull, 8x wheels, and three choices of turret.
Files come in supported and unsupported formats.
These models are optimised for detail at 1/100 or 15mm scale on a resin printer, but they should scale up well too.
Printed dimensions of hull (approx):
L 88mm W 26mm H 22 mm
Printer settings used for display models:
- Anycubic Photon Mono
- Opaque Grey Anycubic Resin
- 0.03mm layer height
- 1.33s exposure time
- 23s bottom exposure time
- 8 bottom layers
- lift speed: 0.9mm/s
- 8x Antialiasing
- Environment: 19-23C, 60-80% humidity
Photon Workshop V2.1.23.RC8