Carden Lloyd Tankette Mk V
Model of the Dutch Carden Lloyd Tankette Mk.V. As available in May 1940. The Dutch army had 5 tankettes and those were the only tracked vehicles in the Netherlands. Well, there was also a Renault R1 tank, but that was only used for testing before May 1940. The Dutch Tankettes had a MG-gun shield what made them somewhat unique compared to the Mk.V's of other countries.
It is a bit unclear what happened with all 5 tankettes, but 2 Tankettes did try to join the fighting at the Waalhaven airport May 10th 1940, but both had taken damage during a German bombing raid. So the vehicles were left behind, but only after the Dutch removed the Machine gun.
Crew 2 (driver + machine-gunner) Armament 0.303 (7.62mm) Vickers Machine-gun.
Picture showing 2 Carden Lloyd Tankette's. Notice the second tankette behind the GMC truck. The first Armored car is a Morris "Koekblikje" (Picture from the "Collection Netherlands Institute of Military History")
Copyright Allan Smit 2022
Non Commercial and personal use only
Included are stl's for the complete Hull, Seperate Machine-gun and a hatch (2 needed).
I also added supported models, those I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using Basic Resin.
Please be aware that the some parts are rather delicate, the gun-shield and small raised window-frame for the driver. Consider using some more flexible resin to prevent breaking to delicate parts.
It is a bit unclear what happened with all 5 tankettes, but 2 Tankettes did try to join the fighting at the Waalhaven airport May 10th 1940, but both had taken damage during a German bombing raid. So the vehicles were left behind, but only after the Dutch removed the Machine gun.
Crew 2 (driver + machine-gunner) Armament 0.303 (7.62mm) Vickers Machine-gun.
Picture showing 2 Carden Lloyd Tankette's. Notice the second tankette behind the GMC truck. The first Armored car is a Morris "Koekblikje" (Picture from the "Collection Netherlands Institute of Military History")
Copyright Allan Smit 2022
Non Commercial and personal use only
Included are stl's for the complete Hull, Seperate Machine-gun and a hatch (2 needed).
I also added supported models, those I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using Basic Resin.
Please be aware that the some parts are rather delicate, the gun-shield and small raised window-frame for the driver. Consider using some more flexible resin to prevent breaking to delicate parts.
| Filename | Size | Last updated |
|---|---|---|
| Carden-Lloyd-MkV-Dutch.zip | 9.3 MiB | 2024-02-28 |
