Japanese Nagara Class Light Cruiser
The Nagara class cruisers were a class of 6 ships of the IJN. All three ships participated in actions during WW2 in the Pacific, mainly as destroyer flotilla leaders.
None survived WW2.
IJN Nagara, sunk August 1944
IJN Isuzu, sunk April 1945
IJN Natori, sunk August 1944
IJN Yura, scuttled October 1944
IJN Kinu, sunk October 1944
IJN Abukuma, scuttled October 1944
Copyright Allan Smit 2023
Non Commercial and personal use only.
The model is provided in 1/1000 scale and is Resin print only. Bases can be printed using a FDM-printer.
1/1800 - resize to 55,56%
1/1200 - resize to 83,5%
There are 6 named bases provided, one per Cruiser. A Class base is also provided. And each base comes in 2 versions. Text recessed and the raised. I used the recessed version for FDM printed bases. Finally a base without text is also included. Do not forget to also re-scale the bases if you print in 1/1200 or 1/1800 scale.
Included a 1/1800 scale pre-supported model which I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using standard resin. Use at your own risk, might be best you create your own supported files, which prints best on you own printer. Some parts are rather delicate, mainly the gun barrels, and you will need to remove support carefully.
The base was printed on an Ender 5 pro (0.16 mm layer) standard PLA.
None survived WW2.
IJN Nagara, sunk August 1944
IJN Isuzu, sunk April 1945
IJN Natori, sunk August 1944
IJN Yura, scuttled October 1944
IJN Kinu, sunk October 1944
IJN Abukuma, scuttled October 1944
Copyright Allan Smit 2023
Non Commercial and personal use only.
The model is provided in 1/1000 scale and is Resin print only. Bases can be printed using a FDM-printer.
1/1800 - resize to 55,56%
1/1200 - resize to 83,5%
There are 6 named bases provided, one per Cruiser. A Class base is also provided. And each base comes in 2 versions. Text recessed and the raised. I used the recessed version for FDM printed bases. Finally a base without text is also included. Do not forget to also re-scale the bases if you print in 1/1200 or 1/1800 scale.
Included a 1/1800 scale pre-supported model which I used for the test-prints on my Anycubic Mono SE (0.05mm layer) using standard resin. Use at your own risk, might be best you create your own supported files, which prints best on you own printer. Some parts are rather delicate, mainly the gun barrels, and you will need to remove support carefully.
The base was printed on an Ender 5 pro (0.16 mm layer) standard PLA.
| Filename | Size | Last updated |
|---|---|---|
| IJN-CC-Nagara-Class-1.zip | 12.4 MiB | 2024-02-28 |
