1-100 Stryker Pack 1

1-100 Stryker Pack 1

1-100 Stryker Pack 1

Please remember: CC BY-SA-NC license.

Versions included:

M1126 Stryker ICV (with/without slats, aircon, spare wheel, open hatches, no-gun option) Use M240 airguard at rear.
M1127 Stryker RV (with/without slats, aircon, spare wheel, open hatches, no-gun option)
M1134 Stryker ATGM (with/without slats, open hatch, optional retracted turret) Use M240 cuppola
M1133 Stryker MEV (with/without aircon, spare wheel)

All slatted versions have a simple version with the wheel wells and as much as possible (without looking bad) behind the slats filled in.

All models printed sitting on their wheels. Turrets and guns printed with gun barrels horizontal.
The M240 complex files are designed to be printed in the same orientation as the vehicle. The other cuppola file is designed to be printed on its side, which makes for a bit more blobby gun, but a nice thin but strong mount.
The IED tube aerials were printed horizontal, not upright.

Important - cut down on each side of the headlight guards before doing anything else.

The only really tricky files are the slatted versions. The simple versions are much simpler to clean.
If you choose the complex ones, it is certainly possible to clean them out - I didn't break a single strut on the two I printed - ,
but they are time consuming.
Cut down besides the headlight guards and struts (top and bottom), then working from the bottom clear out each bay in turn. If you did the cutting right, the support blobs will fall away from under the struts.

Pack 2 will include MGS, MC-B, FSV & ESV. But I need a rest from Strykers for a while.