Trash receptacle collection resin
- Description
- Files
Trash receptacle collection. Some details have been changed for looks/ printability. Scale was a little weird on these: while they are nominally 1/100 they may look small for modern use (especially compared to US cans) so scale them up to whatever LOOKS good to you.
Image is of models printed in 1/50 with 3dbreed figure for scale.
These files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
Image is of models printed in 1/50 with 3dbreed figure for scale.
These files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
| Filename | Size | Last updated |
|---|---|---|
| Wheelie bin sm open.stl | 211.1 KiB | 2024-02-28 |
| box bin flat closed.stl | 785.0 KiB | 2024-02-28 |
| box bin top round.stl | 250.5 KiB | 2024-02-28 |
| corrugated can.stl | 341.2 KiB | 2024-02-28 |
| box bin wheel.stl | 80.5 KiB | 2024-02-28 |
| box bin top flat.stl | 191.8 KiB | 2024-02-28 |
| corrugated can lid handle up.stl | 155.6 KiB | 2024-02-28 |
| Wheelie bin sm top.stl | 45.3 KiB | 2024-02-28 |
| box bin base open no wheel.stl | 317.6 KiB | 2024-02-28 |
| box bin round closed.stl | 810.8 KiB | 2024-02-28 |
| Wheelie bin sm closed.stl | 230.7 KiB | 2024-02-28 |
| box bin base open.stl | 638.7 KiB | 2024-02-28 |
| corrugated can lid handle down.stl | 151.2 KiB | 2024-02-28 |
