Gotha Go 242 and 244 easy print


Easy to print Gotha Go 242 and 244. Some details have been changed for looks/ printability.

The 242 is the glider variant, the 244 is the powered cargo plane (pictured).

I assembled mine closed (because its going to get hung up flying in the bar with the dragon rapide) but this does have the rear body and side doors separate to assemble it loading/ unloading/ crashed/ etc.

For the filament one: the body and tail files are the same for both versions.

For the resin one: the tail file is the same for both, and the side doors are separate meshes should you want to remove them.

Image is of models printed in 1/52 with 3dbreed figure for scale.

The standard files are designed to print AS-IS on filament, no additional supports required.

The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.

Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.

Created by Windham Graves Models
Report Abuse
Categories: , , , Tag:
© Copyright 2022 - 2023 Playable Prints Limited, registered in England and Wales (Company No. 14307502), Initial Business Centre, Wilson Business Park, Manchester, M40 8WN.
Wargaming3D is a trading name of Playable Prints Limited.
Favorites 0 Remove all
Open favorites page Continue shopping