Covenanter easy print
- Description
- Files
Easy to print Covenanter A13. Some details have been changed for looks/ printability. The glacis cargo boxes and rear fuel tank are separate meshes in the resin file If you wish to remove them.
While this tank never fought, It did do a lot of parading around Britain to increase morale, and was used as a training tank.
Image is of model printed in 1/52 with 3dbreed figure for scale.
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
While this tank never fought, It did do a lot of parading around Britain to increase morale, and was used as a training tank.
Image is of model printed in 1/52 with 3dbreed figure for scale.
The standard files are designed to print AS-IS on filament, no additional supports required.
The “resin” files are for those of you that are printing with resin printers and would prefer the assembled models. Resin files are not pre-supported unless otherwise noted.
Please remember that unless otherwise noted these models are uploaded at 1/100, and you need to scale it to match your preferred play-scale.
1/72= 139% (“standard” 20mm)
1/64= 156%
1/56 = 179% (“standard” 28mm)
1/52 = 192% (my preferred scale for 28mm heroic)
1/48 = 208%
Should you have any trouble with them, please feel free to contact me.
| Filename | Size | Last updated |
|---|---|---|
| Covenanter.stl | 6.0 MiB | 2024-02-28 |
| Covenanter Turret Resin.stl | 271.1 KiB | 2024-02-28 |
| Covenanter Body Resin.stl | 5.4 MiB | 2024-02-28 |
