37mm Flak Zwilling 43 .stl pack v. 3.0 updated December 2023

$5.00

37mm Flak Zwilling 43 .stl pack

** This pack was updated to v. 3.0 in December  2023, it was resized, the resin gun mount with combined barrels and gun mount for resin was added reinforced, and a new resin gunner plus a new FDM gunners seat were added.  **

The 3.7 cm Flak 43 was an anti- aircraft gun used by Germany during World War II.  It was a simplified version of the previous Flak 18/36/37. Although primarily mounted as a single gun unit and of vehicles, a dual gun mount was produced as both field mounts and fixed mounts on flak towers.

This model is offered in the Warlord Bolt Action  as a heavy AA gun, a fixed weapon, with a crew of 4. The cost is 70 points as a regular, the gun shield is an extra 5 points. This .stl model represents the gun equipped with the gun shield.

I developed both a resin and FDM .stl pack for this design. I very much recommend the resin print. Due to the inherent limitations of FDM printing, I had to make compromises to allow the FDM print.- thickening parts, deleting the gunner figure, etc,  where necessary.

The resin model has a separate seated gunner figure, if you wish to use your own gunner, use the gunner seat from the FDM pack.  The FDM .stl only gives the gunner seat without a figure.

The barrels of the resin model are joined with the gun mount at 22.5 degree elevation. This eased post print assembly. The FDM model has barrels and gunner seat seat that can all be positioned at the specific angle; although they friction fit they should be glued, and do be cautious to have the angles the same for all three when you glue.

Created by DeweycatProductions
Report Abuse
Categories: , , , Tags: , , , , , , , , , , , , ,
© Copyright 2022 - 2023 Playable Prints Limited, registered in England and Wales (Company No. 14307502), Initial Business Centre, Wilson Business Park, Manchester, M40 8WN.
Wargaming3D is a trading name of Playable Prints Limited.
Favorites 0 Remove all
Open favorites page Continue shopping