28mm 10 Gun Sloop


28mm/ 1:56 10 Gun Sloop

Includes printable cannon and ship scorpions if you prefer a fantasy flavour.

Dimensions (not including spars) are; 420mm x 150mm x 70mm (16.5″ x 6″x 2.75″)

Most parts printable at 0.2mm layer height. I chose to print the cannon and scorpion at 0.1mm layer height for the extra detail. Apart from the cannon carriage and scorpion, everything can be printed without supports.

Printable at 15mm

Can be built with spars, rigging and sails if desired. Requires 8mm (5/16″) dowel, 6mm (1/4″) dowel and elastic thread. Please note, the dowels and fittings will be tight.

Updated March 2021
-Rigging tolerances loosened – It’ll now be easier to assemble your rigging.
-Cannon wheels can now be printed separately – no more supports in the axle hole.
-One piece hull included – printing at 15mm just became easier.
-Assembly instructions added.
-Scale deck plan included. You can now easily lay down a balsa deck.

Sold By Ash and Stone
Report Abuse
Categories: , , Tags: , , , , , , ,
© Copyright 2022 Playable Prints Limited, registered in England and Wales (Company No. 14307502), Initial Business Centre, Wilson Business Park, Manchester, M40 8WN.
Wargaming3D is a trading name of Playable Prints Limited.
Favorites 0 Remove all
Open favorites page Continue shopping