1-100 Centurion ARV
Please remember: CC BY-SA-NC license.
Centurion ARV (UK) Metal tracks, with/without sand shields. (I called this one “early”)
Centurion ARV refurbished for Gulf War(UK) Rubber tracks, with/without sand shields. (I called this one “late”)
Centurion ARV (Dutch) Rubber tracks, no sand shields, different stowage box. (I called this one “Dutch”)
Vehicles printed sitting on their tracks.
Clear out between the tracks underneath the hull before removing the outside supports.
Tracks are delicate, especially the rubber ones, so take that area slowly instead of just ripping everything off in one go.
Cleaning the spade/crane is difficult. If in doubt, print the simple version.
Suggest you cut down both sides beside crane first. Clear away bottom of spade until you can see the support arm. Then on hull sides, clear away around rear sprocket until rear mudguard is mainly clear. Using the end of this as a guide, cut in sideways *below* crane arm up to spade support arm. Then cut down inside crane to the spade support arm. Carefully clear out crane. Then nibble out around spade. If you did the cuts described here, it shouldn’t be too super hard…
Reviews
There are no reviews yet.